12 inches fans: 12 Inch Oscillating Fan : Target

Fanimation Portable Fans – Fanimation Table Fans

  • Filter Results

  • Sort by



Finish



Select
the color that best fits with your space.
  • nickel/silver (4)

  • black (3)

  • blue (1)

  • copper (1)

  • off-white (1)

  • pink (1)

  • red (1)



Product Style



Style
refers to the Style of products that you can refine down on.



Width/Diameter (in)



Width or
diameter represents the measurement from right to left on a product.

This filter is measured in inches.

  • 0 to 10 Inches (3)

  • 10 to 15 Inches (2)

  • 35 to 40 Inches (1)

  • 50 to 55 Inches (1)



Family / Collection



Many of
our products are part of collections that consist of different products with
the same style/design.



Location UL Rating



Refine
your results to look at products that are rated for use in Damp or Wet
Locations.

Wet Rated – safe to come into direct contact with water

Damp Rated – safe to be outdoor, but under cover and should not have direct
contact with water

If something is not wet or damp rated, it can only be used in Dry
applications (indoor only).

  • damp (1)



Number of Lights



Refine
your results by the total count of Lights on a product.

Note for LED fixtures:  The total
count of LED’s is generally higher than the normal count of lights.  Example a 1 light LED fixture may have 10
LED’s



Light Kit Type




Filter by the light kit type of the fan.




  • not compatible (5)

  • included (1)



Height (in)



Height
represents the measurement from top to bottom on a product.

This filter is measured in inches.

  • 0 to 6 Inches (2)

  • 7 to 12 Inches (1)

  • 13 to 18 Inches (1)

  • 43 to 48 Inches (1)

  • 49 to 54 Inches (1)



Price



Refine
your results to fit your budget or a price point. (Prices in USD)
  • $0 to $99 (4)

  • $99 to $199 (1)

  • $400 to $499 (1)

  • $1000 to $1499 (1)



Bulb Type



Refine
your results by the type of bulb a product uses.
  • fluorescent (1)



Number of Blades



Refine
your results by the total count of Lights on a product.

Note for LED fixtures:  The total
count of LED’s is generally higher than the normal count of lights.  Example a 1 light LED fixture may have 10
LED’s

  • 3 (3)

  • 5 (2)

  • 2 (1)

  • 4 (1)



Product Design



Style
refers to the Style of products that you can refine down on.



Control Type




This is the type of control included with the product.

  • wall (1)



Motor Type



Select your Motor Type:

AC:  Alternating Current

DC:  Direct Current (more energy efficient)

  • ac (3)

  • dc (1)



Material




Filter by the type of material the product is made from.

  • metal (2)

  • resin (2)

  • aluminum (1)



Voltage Rating



Refine
your results based on Voltage type

Low Voltage:  12 volts – requires a
transformer

Line Voltage:  110/120 volts -
standard household current

Commercial Voltage:  220 and above -
used in commercial or high voltage applications

  • 120 (4)

  • 12 (2)

  • 110 (1)



Quick Ship




Select this option for products that are delivered in 1 week or less.




  • Yes (1)



Save/Compare



Save/Compare



Save/Compare



Save/Compare



Save/Compare



Save/Compare



Save/Compare

Climate Keeper 12″ Oscillating Desk Fan

Write a Review
Ask the First Question

$14. 99

$16.99

Save
$2.00
 (12%)

Comp Value $17.99

By Climate Keeper

Description

This Climate Keeper oscillating desk fan provides a cool breeze in your home, workplace or dorm room. Its full 90° oscillation moves from side to side for efficient and thorough airflow with a super quiet motor. Offering three speed settings to choose from, this fan is perfect for using on a desk or tabletop.

Product Details

Model Number: TP30-1A

SKU(s): 810337113

Specifications

  • Model number: TP30-1A
  • 13.39″L x 9.65″W x 17.72″H
  • Material: Plastic, copper, iron steel, PVC
  • Wattage: 45
  • Product weight: 3.75 lbs.
  • Wattage: 45
  • Assembly required
  • If leave the product unattended, please make sure the unit is unplugged. Keep children away from this product when in use

California Customer WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause reproductive harm. For more information go to : www.P65Warnings.ca.gov

Features

  • Full 90° oscillation
  • Features 3 – speed push button operation
  • 30° vertical adjustment
  • Super quiet motor
  • Metal fan guard
  • Convenient size is perfect for home, office or dorm

Assembly

  • Assembly required: Yes

Return Policy

If you wish to return your online order, please visit your

order history to start the return process. If you have any issues, contact our Customer Care Support Center at 1-866-BIG-LOTS (244-5687) for assistance with making your return. Please be prepared to provide your order number and email address, or your rewards number, so that we may better assist you.

For return terms, see our full Returns Policy.

Delivery Info

In-Store Pickup

In store pickup is FREE. Orders placed by 5pm local time can be picked up the same day.

Same-Day Delivery

Need it? Get it! Got it. Same Day Delivery available from select stores. You can choose from available delivery windows in cart.

Standard Delivery

Standard Delivery is FREE on orders over $79. Expedited delivery can be chosen in cart for eligible items.

Delivery questions? For more info, visit our Delivery FAQs.

Good to Know

We’ve got curbside pickup! Quick and contactless, simply place your order on Biglots.com. Once you arrive at the store, call the store and describe your car and we’ll bring your order right out to you. Just have your ID ready!


General Disclaimer:

We aim to provide accurate product information, however some information presented is provided by a 3rd party and is subject to change
See our disclaimer.

  • Customer Reviews

Share your thoughts, we value your opinion.

What Our Customers Are Saying

notSoldAtLocation : false
forSaleInStore : true
isBopisTransactable : true
isItemBopisEligible : true
onlineOnly : false
preferredStoreId :
skuOutOfStockForTheLocation : false
skuOutOfStockForMostOfTheLocations : false
sameDayDeliveryEligible : false
isShippingTransactable : false
inStockOnline : false
nextAvailableStoreId :
nextAvailableStoreDistance :
shipmentTypes : [CustomerPickup, Parcel, SameDay]
transitStoresAvailable : false

  

9-inch / 12-inch / 16-inch desktop fan CRYDF-9A / 12A / 16A

Product description / 60 Hz, aluminum motor, 26 W / 2 8 W / 45 W, linear / honeycomb grill, 2/3 speeds, 3 polypropylene blades, oscillation function, 1.5 meters common power cord, plug on request.

Read more

Check availability

5.65
EUR/pcs
5. 65
EUR

Make a deal safely and with a guarantee

Leave a request
Chat with Seller

GUANGDONG CHANGRONGYU HARDWARE & ELECTRIC MANUFACTORY CO., LTD.

Unverified supplier

All products of this supplier

Shipping information

Calculate and arrange your shipment to anywhere in the world with Qoovee Logistics.

Guarantee of shipment on time and security of payment
Calculate shipping from Qoovee

Fans

Similar products

JSC “Glazovsky plant Metalist”

Glazov, Russia

EUR
1389.83/piece
1389.83

Purpose of the Aerator:
Aerators PAM-24, PAM-32 are designed for showering workplaces with humidified and cooled air in hot shops of metallurgical, coke-chemical and machine-building enterprises and other similar purposes (at ambient temperature up to +45º C). Aerators are installed near the equipment, the operation of which is accompanied by maximum heat generation: dryers, rollers, calenders, vulcanizing and hydraulic presses, etc.
TU 4863-075-02962743-2013
Device and principle of operation:
The aerator has a vertical layout and consists of the following main units: axial fan VO-25-188-8, support, housing, compressed air supply valve, water supply valve, nozzle, fence.
After the aerator is turned on, the compressed air supply is regulated by taps and water is smoothly supplied in an amount sufficient for humidification.
Modification of the aerator without equipment for air humidification can be used as a blower fan in enterprises of other industries.
Terms of Use:
ambient temperature from minus 40º C to plus 40º C, relative humidity up to 80% at a temperature of 25º C in a temperate climate of the 3rd category of placement according to GOST 15150. It is forbidden to operate aerators in fire and explosion hazardous areas, as well as in rooms with high humidity .

Contact supplier

JSC “Glazovsky plant Metalist”

Glazov, Russia

EUR
1853.11/piece
1853.11

The unit heats air using the heat of hot or superheated water coming from external heat supply sources and is intended for air heating (including standby heating) of industrial premises of category D and D according to SNiP 2. 09.02-85, the technological process in which are not accompanied by the release of dust of explosive gases. The air must not contain sticky substances and fibrous materials.
The unit must be operated in macroclimatic regions with a temperate climate (UZ) of placement category 3 in accordance with GOST 15150. The coolant temperature is not higher than 180 ° C and pressure is not more than 1.2 MPa.

Contact supplier

Explosion-proof stainless steel centrifugal fan –

JSC “Glazovsky plant Metalist”

Glazov, Russia

EUR
7000.75/piece
7000.75

Fans for use in chemical plants, in explosive environments, with acid fumes. Copper inserts on the impeller blades, pulleys and other components eliminate the appearance of sparks. The engine is explosion-proof. The fan housing is made of stainless steel AISI 304. Designation example: VTS-4-75-12.5

Contact supplier

Mine fan ATEX Explosion-proof VME (SVM) –

org/Organization”>

JSC “Glazovsky plant Metalist”

Glazov, Russia

EUR
12877.53/piece
12877.53

Single-stage local ventilation fans of the VME type with explosion-proof removable electric motors comply with TU 3146-077-02962743-2013 and are intended for ventilation of dead-end mine workings in coal and ore mines, including those hazardous by gas and dust, at density air up to 1.3 kg/m3, temperature from 268K to 308K, dust content up to 50 mg/m3 and relative humidity up to 95% (at 298K). VME-4, VME-5, VME-6, VME-8, VME-12.
GENERAL INFORMATION:
the ability to turn off the VME-6 fan when the normal temperature is exceeded;
the possibility of using for ventilation of small workings;
the design of the fans allows you to connect two fans in series to increase the pressure in the pipeline;
at the request of the customer, the fan can be equipped with a silencer;
The design of the fan uses an anti-stall device that expands the area of ​​operation of the fan and prevents it from entering the surge.
MANUFACTURING OPTIONS:
without silencer;
with silencer;
at the request of the consumer, fans can be supplied for voltages of 380/660 V and 660/1140 V;
VME-12A fans are manufactured with impeller blades angle of 15, 25 and 35 degrees.

Contact supplier

Floor fan – 81042

LLC BIOPHARM

Russia

EUR
20.62 – 23.31/pc

Fan – great for the price, will save you anyway in this heat this summer. There are all the necessary adjustments (height, angle, rotation, mode). Button control is simple and reliable. Rotating blades in a protective mesh casing. Small, compact, doesn’t take up much space. Quite powerful. It will attract with its design: minimalistic, there is nothing superfluous. Quite stable on the floor and comfortable in sound. The child does not wake up during sleep. Definitely will be your good purchase.
The characteristics are:
-5 blades
-3 speed modes
-from 55 watt

Contact supplier

Industrial fans – 70961

org/Organization”>

Tver industrial and repair group of companies, Tver

Russia

Get the price
EUR
0
0

PRODUCTS
Fans
Radial fans
Roof fans
Duct fans
Axial fans
Specialized fans
Accessories
Household fans
Air distributors
Automation for ventilation
Control boards
Speed ​​controllers
Temperature controllers
Sensors
Anemometers
Management and protection
Mixing units and accessories
Thermal ventilation equipment
Details of ventilation systems
Thermal insulation materials
Thermal equipment
Convectors
Fan heaters and heat guns
Thermal curtains Teplomash
Infrared heaters
Dust collectors and filters
Compact air handling units
RVZ products
Electric motors
Accessories for fans
Information boards
Aerodynamic testing
Double bearing assembly
Accessories for ventilation grilles
galvanized pipe
Control and automation cabinets for various technical processes
Accessories for air valves
Accessories for supply chambers
Equipment for smoke exhaust systems and fire protection materials
fire retardant materials
Air handling units
Air ducts and fittings
air ducts
Network ventilation
Chimneys
Dampers and valves
Fixture for ventilation
Profiles for air ducts
brackets
Mounting profiles and fixtures
Ribbons
Control nodes
Clamps and flanges
Anchors and dowels
Fasteners
Electrical products for ventilation
Foam, sealants
Air conditioning accessories
Fitting
Hot shop equipment
Air conditioners
Household split systems
Semi-industrial split systems
Optional equipment

Contact supplier

Axial fan with composite impeller – 68854

org/Organization”>

VETRAN

Russia

Get the price
EUR
0
0

Axial fans of the VOK series are used in exhaust ventilation systems of industrial and public buildings, in emergency smoke ventilation systems as back pressure fans. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 °C, not containing sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg/m³.

Contact supplier

Radial roof fan horizontal discharge (VRK.G) – 68853

VETRAN

Russia

Get the price
EUR
0
0

VRK.G radial fans are used in exhaust ventilation systems of industrial and public buildings. Fans of general exchange design are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to plus 70 ˚С, not containing sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg/m³. Also, VRK.G fans are available in corrosion-resistant and explosion-proof versions.

Contact supplier

VETRAN

Russia

Get the price
EUR
0
0

VR.80-75 radial fans are used in supply and exhaust ventilation systems of industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +70 °C, not containing sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg/m³. Also BP.80-75 fans are available in explosion-proof and corrosion-resistant versions.

Contact supplier

Radial smoke exhaust fan series 80-75

VETRAN

Russia

Get the price
EUR
0
0

Radial smoke exhaust fans type VRD.80-75 are designed to remove high-temperature smoke-air mixtures that occur during a fire and simultaneously remove heat outside the serviced premises. The fan is used in systems of exhaust (emergency) ventilation of industrial, public, residential, administrative and other premises (except for categories A and B of explosion hazard according to NPB 105-03) to remove smoke-air mixtures formed during a fire with a temperature of up to +400 °C or up to + 600 °C for 120 minutes. It is possible to use fans in general ventilation systems of industrial, public, residential, administrative and other premises for moving air or other non-explosive, non-aggressive gas mixtures with temperatures up to +70 °C, not containing sticky substances and fibrous materials , with a concentration of dust and other solid impurities not more than 100 mg/m³, with a reduced speed of not more than 50%.

Contact supplier

Rectangular duct fan (VKT) – 68850

VETRAN

Russia

Get the price
EUR
0
0

Rectangular duct fans (VKT) are used in supply and exhaust ventilation systems of industrial and public buildings. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 °C, not containing sticky substances and fibrous materials, with a concentration of dust and other solid impurities not more than 100 mg/m³. 69(ambient temperature from -30 °С to +40 °С).
At the place where the fans are installed, the root-mean-square value of the vibration velocity from external sources of vibration should not exceed 2 mm/s.
The degree of protection provided by the shell is IP44.

Contact supplier

Axial fans RQA / RQD – 67669

LLC “RU Elktroniks”

Russia

Get the price
EUR
0
0

The axial exhaust fan is a simple device consisting of an impeller, blades and a protective housing. It is intended for removal and supply of air, provides movement of air streams. You can buy an axial fan to create a ventilation system, equipment cooling and other tasks. The device finds application in various fields. It features a reliable design, easy installation and long service life.
Our catalog contains a wide range of models from trusted manufacturers. AC and DC fans are available on request, as well as grilles of various sizes. The cost of axial fans largely depends on:
from the selected model
shipping method,
urgency of the order.
RUICHI and TIDAR axial fans are always available.

Contact supplier

DC Fan, 12 V, 119 x 119 x 32 mm, 138 m³/h 60713-600

DC Fan, 12 V, 119 x 119 x 32 mm, 138 m³h

FILE TYPE

Download

Data subject to change without notice

PRODUCT FEATURES

  • Item Type: Fan
  • Suitable for: 19 inch fan trays
  • Item Width: 119mm
  • Length: 119mm
  • Product height: 32mm
  • DC voltage: 12V
  • Air flow: 140 m³/h
  • Noise level: 39 dB(A)
  • Power: 8W
  • Maximum static pressure: 46 Pa
  • Ambient temperature: 70 °C

Suppliers in your area

Below is a list of local suppliers that currently have this item in stock:

Distributor Quantity Availability date
Information is absent.

ADDITIONAL PRODUCT DETAILS

Axial fan, 119 mm, with DC input. Spare part for 1 U fan trays.

Order connecting cable and protective grille separately.

CERTIFICATES

What’s in the box

The following items are included with this product:

Product Description Quantity
1 Fan with 310mm cable 1

*Price shown is unit price and does not include VAT.