Change batteries samsung remote: how to replace the remote control batteries of a samsung tv

How to remove a battery from a Samsung Smart TV remote

Ivan Makhynia ./ Tab-Tv

Modern Samsung Smart TVs are very smart and advanced devices with many functions and tools in their arsenal to satisfy the maximum number of users. One of the strengths of these Smart TVs is a quality operating system that allows you to run various programs and streaming services directly from your Samsung TV without having to connect to its third-party devices. But even with today’s TVs, one thing has been around for a long time and is unlikely to change anytime soon. They are all controlled by a proprietary remote control. And unlike Smart TVs themselves, remotes acquire new functions much less frequently. For example, most Samsung TV remotes are still equipped with regular batteries to work.

However, because the new remotes have changed their appearance, they have been made more minimalistic and “integral.” For this reason, many users can not immediately understand how to access the battery compartment to put in new batteries and replace the failed ones. Although it may not seem obvious, it is pretty simple in practice. Let’s look at what Samsung TV remotes are and how you can get the batteries out of each one.

Table of Contents


What to do to remove a battery from a Samsung Smart TV remote

There are two remote control options for Samsung Smart TV. A giant black remote with voice control and a few extra buttons. In addition, the aluminum design has a more minimalist remote with a skinny body and without additional functions. Let’s look at how you can change the batteries for each of these remotes using the special instructions on the manufacturer’s website.

Let’s start with the more advanced black version. This remote is slightly curved and broader. You will need to open the back cover with the slide down to get to the batteries. Many users have commented that pushing it off is pretty hard, and they suggest poking it with something sharp at the top near the IR sensor for a start.

Samsung. com

The case is a little easier if we’re talking about the minimalist model of the Samsung TV remote, which is usually made of silver aluminum. First, you must turn the remote control to the back panel and find a small button. When you press it, slide the panel with the buttons up. This way, you can open the battery compartment.

How to remove the battery from a standard Samsung TV remote or solar remote

Let’s also help talk about how you can get the batteries out of a regular Samsung TV without the Smart TV features. As we cry, these older Samsung TVs have an extended rectangular remote. Even some early model Samsung Smart TVs had the same remote.

It would be best if you opened the lid on the back panel to get to the batteries. You need to find the recess with the down arrow, slide it down, lift it to open that cover and add the batteries inside.

Also, if you have the newest Samsung Smart TV, you may have a remote with solar cells. These remotes are powered by the built-in accumulator and do not have conventional batteries or compartments. So, in this case, you cannot get to the battery without disassembling your remote. This is because it is monolithic. According to the manufacturer’s idea, if you follow the safety rules, you will not need to change the battery during the entire product’s lifetime.

What batteries do you need for your Samsung Smart TV remote?

Let’s also figure out what batteries you need in your Samsung Smart TV remote. I’ll tell you immediately that you’ll need two AA or AAA batteries for each remote control. I can only recommend you get rechargeable batteries, so you don’t have to change them every time, and you can recharge them from time to time.

For the larger Samsung Smart TV remote that opens with the fully retractable back panel, you will need 1.5 V AA-type batteries. Also, remember to place the positive and negative ends correctly. You can see this by engraving the inside of the battery compartment on your remote control.

If you have a more minimalist remote or an old Samsung TV remote, you will need 2 1. 5 Volt AAA-type batteries. You should also be careful with the positive and negative ends. I recommend not buying cheap batteries so you do not worry if they get hot and damage your remote from the inside, so it is better to buy batteries from trusted manufacturers.


Related articles

More for you

How to Change Batteries in Samsung Smart TV Remote? [Answered 2023]- Droidrant

If you need to change the batteries in your Samsung Smart TV remote, you’ll first need to locate the battery compartment. This is usually located above the body of the remote and can be accessed by sliding the remote up and out. Press the r and l buttons to open the compartment. You’ll need to insert new batteries in the correct order. Make sure to place the batteries in their designated slots. When you’re done, you should see a blinking LED light.

The Samsung Smart TV remote is easy to change the batteries. The back cover has a small crack on the front, which you can pry off with your fingers. Then, slide the back cover back on. The batteries are stored in this compartment, so make sure to keep it clean and unbreakable. If you don’t want to smudge them, you can use lemon juice or vinegar to clean them.

Related Questions / Contents

  • How Do I Open My Samsung Smart Hub Remote?
  • How Do You Open the Back of a TV Remote?
  • How Do You Open a Remote Control?
  • Does Samsung TV Remote Have a Battery?
  • How Do You Put a Battery in a Remote?
  • How Do I Check the Battery on My Samsung Remote?
  • How Do You Open the Back of a Samsung TV?

How Do I Open My Samsung Smart Hub Remote?

If you’ve been wondering how to change batteries in Samsung Smart TV remote, you’ve come to the right place. This article will provide you with easy steps that will get you back on the path to using your remote without a hitch. First, you need to log in to your Samsung account. You can do this by creating an account, or by logging in using your Facebook or PayPal account. Once you have done this, you can proceed with the steps outlined in this article.

After you’ve found the battery compartment, slide the body of the remote upwards. You’ll see a crack or gap on the cover. Press a directional arrow or prompt to align the batteries. Then, slide the battery compartment cover back into place. Remove the old batteries and replace them with the new ones. Make sure you use alkaline batteries. If your batteries aren’t the right type, you’ll have to buy a new one.

How Do You Open the Back of a TV Remote?

If you have a Samsung Smart TV, you will need to open the back cover of the remote to access the battery compartment. The back cover slides off by sliding it up. Make sure that you do not pry or scratch the cover. If you follow the instructions on the remote, you can remove the old battery and replace it with the new one. This procedure also works for other models of Samsung Smart TV remotes.

If you are unable to do so, then the remote may be having a serious problem. The remote may not be able to communicate with the television anymore. If this happens to you, then you should contact a Samsung service center in your area for assistance. In case your remote is not working properly, you can try the steps below to resolve the issue. If you cannot solve the problem, unplug your Samsung Smart TV from the wall.

How Do You Open a Remote Control?

To remove the battery compartment from a Samsung Smart TV remote control, slide the back cover of the device up until the battery compartment is visible. If there is no battery, the remote can be removed. After the battery compartment is exposed, slide the back cover of the device off the rest of the way. This will give you access to the remote control’s battery compartment and instructions. To replace the battery, slide the back cover back into place.

You can also access the Smart Hub menu from the home screen of the television. The home screen of the television displays settings for the main television, cable or satellite service, and web browser. If the remote does not come with an infrared display, you can use a wired keyboard to navigate the TV. You can use the arrow keys to navigate the menu, while entering selects a menu.

Does Samsung TV Remote Have a Battery?

If your Samsung Smart TV remote is not sending the infrared signal anymore, it may be due to a battery issue. To replace a dead battery, you can press the power button on the remote for 60 seconds. If the remote is still not sending the signal, you can remove and replace the battery. If the battery is still good, you can reactivate it by pressing the power button on the remote until the home screen appears. If the problem persists, you may need to install new batteries.

If you have a problem resetting your Samsung Smart TV remote, you should first check the batteries. Most remotes have batteries that last between three and six months. It is common for batteries to ‘flatten’ after extended use, so you should take them out and place them in a different slot. If this doesn’t fix the problem, you should replace the remote and contact Samsung support. If you’re unable to find a local technician, you can send a concern to the company’s customer support. Alternatively, you can try the steps below.

How Do You Put a Battery in a Remote?

The batteries in your Samsung Smart TV remote can malfunction from time to time. You should make sure that you use high-grade batteries and not the cheaper ones. Cheap batteries can have lower power than the good ones and this will cause problems for your remote. You can also test a new battery by following the same steps as replacing the old one. Remember to insert the batteries with their positive and negative sides correctly.

The remote has buttons for specific features. Make sure that the polarities of the buttons match with those on the battery compartment. The remote control’s colour and shape may vary depending on its model. Try to avoid using batteries with bright lights. If possible, use alkaline batteries for better performance. These batteries will also last longer than other brands. Listed below are some tips to replace the batteries in your remote.

How Do I Check the Battery on My Samsung Remote?

If you want to use your Samsung Smart TV remote for a long time, you must make sure the batteries are fully charged. If you notice any glitches on the remote, you must first reset it. When performing a reset, it will drain the excess charge from the device. If the problem persists, try replacing the battery or replacing the remote. To avoid any mishaps, always perform a reset after every use.

To check the batteries, turn over the remote and press the arrow buttons on its rear. The cover will open. You should insert two AAA alkaline batteries and replace them. Afterward, replace the batteries by sliding the battery cover back into place. The battery cover should slide up and down. Make sure that you put them back into the right position and align the positive and negative polarity.

If you keep pressing the power button of the remote, it will eventually run out of battery power. If it continues to pulse red after pressing the power button, the batteries are dead. Ensure that the red light on the remote does not blink, as this may indicate a dead battery. If the LED light is not on, the batteries are low. Alternatively, you can also look for a red light on the remote.

How Do You Open the Back of a Samsung TV?

Unscrew the screws and pull out the back panel of your Samsung television. This can be tricky if your TV is wall-mounted. Most models have a small sticker on the back that contains the serial number and model number. If you’ve never opened the back of a TV before, you can find the serial number and model number by accessing the settings menu. After you’ve accessed the settings menu, you’re ready to open the back panel.

Unscrew four screws from the back of your Samsung television. Then, pull the two strings and lift the television. Be careful not to force the TV to move; it could fall over. Alternatively, you can use a wall mount to mount your TV to the wall. Once the back panelling is removed, you’ll need to unplug the TV and remove any remaining screws. If you need to use a tool to replace the back panelling, follow the same process described above.

Learn More Here:

1.) Samsung Smart TVs

2.) Samsung Official Support

3.) Samsung TV – Wikipedia

4.) Samsung TV Models

Why the TV does not respond to the remote control

Modern users have already forgotten those distant times when you had to get up from a comfortable chair to change channels, make the sound louder or adjust the brightness – today the remote control (remote control) provides invaluable assistance in this. Therefore, if suddenly the TV does not respond to the commands of the control panel, this causes some discomfort. Why this happens, and how to reanimate the device, we will consider below.


Why the remote control does not work

If your remote control does not work on the TV, then there can be many reasons, and only an experienced master can figure out the essence of the problem, establish an accurate diagnosis. With the help of special diagnostics, the cause will be found in a short time, and often it lies in other devices – this already requires completely different actions. However, there are quite commonplace reasons that cause problems with remote control.

Check the remote control

Sometimes there is such a problem that the remote control of the TV does not work. Most often, the cause of the problem lies in itself. Of course, if the remote control has been dropped or damaged mechanically, then it is not so easy to fix it. First you need to check the joint operation of the television receiver and the remote control. To do this, perform the following steps.

  1. Make sure the TV is connected to the network. If not, plug the power cord into a power outlet.
  2. Verify that mains voltage is present. A safety valve may have tripped due to an interruption, or the power may have been cut off.
  3. Check the operation of the TV receiver without remote control . To do this, set various commands using the TV control panel. If everything is in order with the device, then the problem lies in the remote control.


The most common reason for device to stop working is low batteries . This is also shown by the statistics of customer requests to household appliances repair points. But replacing power supplies is the simplest thing that is not difficult to handle. We find on the back of the device a cover under which there are batteries. On the cover there is a special corrugated surface, pressing on which, it can be easily moved. Movement occurs in the direction indicated by the arrows. After opening the compartment, we take out and dispose of the old batteries, and insert the new ones in their place, observing the polarity.

Another reason is also possible: the batteries themselves are in order, but the contacts in the power compartment are oxidized or loosened. To check their condition, remove the cover as described above. Let’s shake the batteries a little. If they are loose, hanging in the nest, they need to be tightened. After removing the batteries, tighten the contacts with a screwdriver, then install the power back.

Oxidized steel parts do not conduct electricity. Oxidation occurs from dirt, dust, moisture. With a regular cotton swab soaked in alcohol or cologne, wipe the contact points. If this is not enough, and the corrosion is not completely removed, remove it with a sharp metal stick. A needle or screwdriver will do.


In addition to the batteries, the infrared LED may also be defective. It can break off or simply fail. It is simply impossible to determine whether the device is in order or not: for this, will need a smartphone.

The following conditions must be met to test the operation of the remote control using a mobile device.

  1. The TV remote control must have an infrared sensor.
  2. You will need a smartphone with a camera.

The sequence of steps for checking the operation of the IR sensor using the phone is as follows.

  1. Turn on the mobile device camera . In this case, the screen will display what is within the range of the camera.
  2. Point the remote control at the turned on camera and long press one of the buttons. It is best to press the on / off TV receiver.
  3. If the remote control is active and the IR sensor is working, a reddish or blue-violet light from it will be visible on the smartphone screen. The weaker the light, the worse the remote control works. Weak operation may be from problems with the batteries or oxidation of the contacts. Repairing these elements will help the device to function properly again.

Attention! At the time of checking the operation of the LED in the room should be dark.

Using this technique, you can identify those buttons on the remote control that do not work, and repair them. Sometimes specialist advice is required. If the device cannot be repaired, a new remote control must be purchased.

Signal frequency does not match

The indicator is on, but the TV does not turn on with the remote control? Such a malfunction, according to statistics, occurs more often with Sony and LG products than with other manufacturers. It is necessary to check the remote control for the signal frequency on a similar model with friends or immediately contact the service – experienced craftsmen will check the device.

Signal disappears

The TV does not turn off / on using the remote control, the indicator responds, but there is no action, or the TV starts to respond only after pressing any button repeatedly. Such a malfunction appears more often with Philips and Samsung TV brands – try to solve this problem with by simultaneously pressing Program and Volume on the front of the TV. If the problem persists, you need to reflash the product system to the latest software version, then your TV will turn on the first time.

Extraneous interference

They are very rare, but cannot be ruled out. Just make sure that nothing interferes with the operation of the remote control: flashing fluorescent lights, other household appliances such as a microwave oven or microwave oven. For example, such a situation can arise when the TV is not properly placed in the kitchen: many users put the TV on the microwave without thinking about whether it can be done. Perhaps these steps will help answer the question why the TV does not turn off and turn on with the remote control.

The problem lies in the TV

As a result of numerous checks, you found out that the remote control is working, and the TV is still not going to turn off when you press the corresponding button on the remote control? There are few options here: the photodetector does not work correctly, or there was a breakdown in the product control processor . You cannot fix such a malfunction on your own – by your actions you can cause irreparable harm to delicate equipment. It can simply turn off forever, and no magician will be able to revive it, and you have to go for a new TV.

How to replace a defective remote

Every user should know that repairing a remote is sometimes much more expensive than buying a new universal or custom-made TV. Therefore, if the remote control has a serious malfunction, then in 99% of cases it is easier to replace it than to repair it. Our article will help you choose a new remote control.

By the way, any smartphone can be configured to control TV if you download a special program on it that turns it into a unique remote control for your household appliances.

All you have to do is point your mobile device at the TV for synchronization and remember the settings. Such a remote control is reliable in operation, and it will not have the problems listed above.

Samsung TV remote does not work

Samsung TVs come with two types of remote controls. Universal Remote Control and Smart Remote.

Universal or standard remote control – communicates with the TV using infrared signals. To control the TV, you need to point the remote at the TV and press the desired button.

Samsung Smart remote control is an intelligent remote control, this remote control has a Bluetooth module. The TV is additionally controlled by commands via bluetooth, it also has a built-in microphone. Using the Smart Remote, you can perform voice searches, for example, on the Internet. The Samsung Smart Remote must be paired with the TV. The remote automatically syncs with the TV the first time you turn it on. Pairing is only required for Samsung Smart remotes, pairing is not required for universal remotes.

Samsung Smart TV remote is not working possible problems

Modern TVs are full-fledged computers in which certain programs are responsible for the operation of individual television modules. Problems with the remote control can manifest themselves in different ways. The most common problems with the Smart Remote are as follows.

  • The remote can only turn the TV on or off.
  • Remote control does not work, red light 9 flashes0040
  • Some buttons on the remote control do not work.
  • TV turns on and off by itself.
  • Sometimes the TV stops responding to the remote control.

What you need to know about the Samsung Smart Remote. This remote control has a built-in Bluetooth transceiver. For the remote and TV to work properly, the devices must be paired. Once paired, the remote and TV work together. Let’s look at why the remote might not work and how to fix it.

Samsung remote test for the first time

The smart remote is battery powered, as of 2021 premium TVs come with solar powered remotes, these remotes are rechargeable, can be charged via USB, or are self-powered by the built-in solar panel. In Smart remotes without solar panels, the batteries are replaced with new ones; in solar panels, the remote is charged from the USB port of any device (TV or laptop). The battery level may not be sufficient for normal operation, so charge the remote control or replace the batteries.

The remote control can only turn on or off the TV

This is because the on/off button works via infrared signal, you need to point the remote at the TV and press the power button. After the TV is turned on, the smart remote starts working through the Bluetooth connection, so if there is any problem with the Bluetooth connection, it will not work.

However, connection problems are not the only reason why your Samsung remote might not work. As a rule, problems arise for the reasons listed below:

  • Problems with Bluetooth
  • Problems with the batteries of the remote control, I have already mentioned this before.
  • Software error.
  • Bluetooth error in remote control or TV.

The remote control only turns the TV on and off fix

If your remote control only turns the TV on and off, there are only a few possible solutions to the problem.

  • Remote control and TV, although paired, are not synchronized.
  • Remote control defective
  • The bluetooth module in the TV is defective.

Follow these steps to identify the problem.

  • Unplug the TV from the mains for three to four minutes, this will completely de-energize the electronic components of the TV. After turning on the TV will load the operating system from memory, and the cache files will be deleted.
  • Pair remote-TV and re-sync remote and TV, I will tell you how to do it later.
  • Replace Smart Remote.

The remote control does not work and the red indicator light is flashing, fix

Typically, this problem occurs when the remote control and TV cannot synchronize to transmit information. To resolve the issue, follow these steps

  • Check if there is any wireless device in front of the TV, such as a WiFi soundbar. If the bar is very close to the TV, the Bluetooth signal may be suppressed.
  • Unplug the TV from the mains and restart it.
  • With the TV turned on, press and hold the power button for 20 seconds. Conversely, when the TV is off, press and hold the power button for 20 seconds, this will clear the cache. (Depending on TV model)
  • Pair the remote control with the TV again.

Some buttons on the remote control don’t work Solution

A rather rare situation, usually a malfunction of the buttons on the remote control. It is necessary to disassemble and clean the contact pads under the remote control buttons

TV turns on and off by itself

Check if Anynet+ (HDMI-CEC) is enabled. This is a function to share control of various devices connected via HDMI, such as Roku or a player. These devices can command the TV to turn on. Remove the batteries from the remote control and see if the TV turns on by itself. If this still happens, restart your TV. If the TV still turns on by itself, this indicates a problem with the TV.

Problems with the remote control troubleshooting

The most common problem is when you can turn the TV on/off with the remote, but the other buttons do not respond. This usually means that your remote control is having problems with its Bluetooth connection, it may simply have lost connection with the TV, or there may be software problems.

If your remote still responds to the on/off buttons, you will need to reset your TV. To do this:

  • Unplug the TV from the mains, wait 30 seconds. Or wait until the TV indicator turns off.
  • Connect the TV to a power source.
  • Pair the remote control and TV.

The TV sometimes stops responding to the remote control.

If the TV intermittently stops responding to the remote control. A possible cause is insufficient battery power. You are very far from the TV The maximum recommended distance between the remote control and the TV is 30 feet (10 meters). The actual distance can be much less, this is influenced by the energy field in the house, which is created by other electronic devices.

Troubleshooting other Samsung TV remote control problems

First of all, check the remote control batteries and replace them with new ones. If the batteries are dead, the remote control will not work properly. Usually the remote does not stop working right away, but you may find that you have to press the button 2-3 times before it responds. Also a telltale sign of battery problems is a distance problem – the lower the battery level, the closer you have to bring the remote to the TV for it to work.

How to reset your Samsung remote control

Sometimes resetting your Samsung TV remote control fixes the problem, so you might want to try this method. Given that the remote control is a rather primitive device, the chance that you will do something wrong is extremely small, so you can reset it at home.

To reset the remote, remove the batteries and wait about 3 minutes, or press the power button and hold it for 5-10 seconds. There are capacitors in the remote that take a while to turn off. This only works for the universal remote.

The smart remote, even if it is not powered, remembers the pair created via Bluetooth. When syncing with the TV, the remote control and TV will automatically reset and re-sync. You don’t need to reset the TV remote control.

Pairing with the Samsung remote control

Since the smart remote is a Bluetooth device, it must be paired with the TV before use to allow the TV to work with the remote. Pairing the remote control is almost the same as pairing any other device, so it’s a snap. However, there are precautions for proper pairing. Pairing occurs at a high signal level. Therefore, when pairing the remote control and the TV, the remote control must be near the TV, and the batteries in the remote control must have a high level of charge.

How to pair your Samsung remote control

If you have a new remote control that has not been previously paired with your TV, you will need to pair it with your TV. Pairing usually happens automatically, but if it doesn’t, you need to force the pairing.

Starting in 2016, you can pair the remote control with your TV by pressing the two RETURN and PLAY/STOP buttons on the remote control. Please note that the remote control must be placed as close to the TV as possible. If the pairing is successful, a message will appear on the TV screen stating that the remote control is connected to the TV. If you see a message that the remote is not available, there are several options: firstly, your TV does not support Smart remote, and secondly, you are trying to connect an incompatible remote. Make sure the remote control and TV are compatible.

Pairing the remote control with a Samsung TV (2016-2021)

2016-2021 models include T, R, N, M, Q, LS, K series and all QLED, LIFESTYLE series, and screen TVs LED. You can read more about Samsung TV model numbers in our article. Once you have determined the Samsung TV model number, you need to point the remote at the TV and simultaneously press the RETURN and PLAY/STOP buttons on the remote for about 5 seconds, but at least 3 seconds.

Connecting a remote control to a Samsung TV (2015)

J Series smart TVs work with previous generation remote controls. To pair the remote control with the TV, simultaneously press the buttons RETURN / EXIT and EXTRA and hold them down for at least 3 seconds.

Pairing the remote control with a Samsung TV (H series, 2014)

The H series also looks different from other models, it is connected by pressing the button RETURN (Return) and GUIDE (MANUAL) hold for at least 3 seconds.

Pairing the remote control with a Samsung TV (E and F series, 2012-2013)

To pair the remote control with a 2012-2013 Samsung TV (F and E series), you need to point the remote at the TV and press the button PAIRING . It is located on the back of the remote control. However, you can also pair the remote control with your TV by simultaneously pressing the RETURN and GUIDE .

Samsung started making smart TVs with smart remotes in 2012, so all older models don’t have this feature.

Unforeseen problems sometimes occur when pairing the remote control with a Samsung TV, especially on older TVs. In this case, it is recommended to disconnect the TV from the mains for 1-2 minutes. Then turn on the TV and pair the remote control.

Also remember to keep the buttons pressed for at least 3 seconds, this is the time needed to synchronize between the TV and the remote control.

Attention! If there is a problem with the remote control, it does not mean that it needs to be paired again. Sometimes it can be a battery problem or a software bug.

How do I reset the Samsung Smart Remote?

Some people ask, “How do I reset my Samsung remote?”. There is a simple answer to this question: Like any other Bluetooth device, the Samsung Smart Remote does not need to be reset, it can simply be paired again if necessary.

Attention! If there are problems with the remote control, this does not mean that re-pairing is required. First you need to check and replace the batteries in the remote control.

How to replace the batteries in the Samsung Smart Remote

To replace the batteries, you need to remove the battery cover, remove the used batteries and install new ones. Also pay attention to the polarity of the batteries, usually information on how to install the batteries is located in the battery compartment.