Honeywell fans how to clean: How to Disassemble and Clean a Honeywell Quietset Tower Fan

How to Clean a Honeywell Fan (Floor, Table, and Tower)

If the dust has settled on your Honeywell fan, it’s due to be cleaned. The last thing you need is your fan blowing dust and debris around your home. But where to start?

We’ve put together a comprehensive guide for how to clean a Honeywell fan. This includes a method for disassembly and another method without taking it apart.

So whether you’re feeling like a quick lazy clean or a deeper clean, keep reading for our favorite methods.

Key Takeaways

  • Unplug and disassemble the Honeywell fan before cleaning to ensure safety.
  • Use a vacuum cleaner, microfiber cloths, and a soapy water solution to clean the fan thoroughly.
  • Reassemble the fan and let it air dry completely before using it again.
  • Regular cleaning improves fan efficiency and prevents dust buildup.

Table of Contents

  • Safety Precautions
  • How to Take Apart a Honeywell Fan
  • How to Clean a Honeywell Fan
  • How to Clean a Honeywell Fan Without Taking It Apart
  • Cleaning a Honeywell Tower Fan
  • Why Did My Honeywell Fan Stop Working?
  • FAQs

Safety Precautions

Before you get started, it’s essential to make sure you aren’t taking any risks. You should ensure a few main details before you begin.

  • Make sure the fan is unplugged. You don’t want any electricity running through the fan while you’re cleaning. Unplug the fan and let it sit for around 30 minutes to drain any electricity.
  • Work in a well-ventilated area. Chances are there will be quite a lot of dust loosening as you clean. So, if you can, work outdoors or near a window, your lungs will thank you for it!
  • Wear a mask and glasses to avoid getting dust and debris into your lungs and eyes.
  • Keep little fingers away. Get somebody to look after your kids so they don’t risk touching blades, playing with screws, or dealing with other dangerous elements.

How to Take Apart a Honeywell Fan

You can disassemble your tower, table, or floor fan for a deeper clean. Your fan should come with instructions so you can dismantle it. But in general, here’s how to take apart your Honeywell fan so you can clean every nook and cranny.

Let’s start with the portable table and floor fans:

  1. Unplug the fan.
  2. Locate the screws on the back of the fan.
  3. With a screwdriver, unscrew each screw.
  4. Remove the back cover.
  5. Optional: You can remove the blades on the standing floor fans. Unscrew the blade knob and pull the blades away from the motor.

Here’s how to dismantle Honeywell tower fans:

  1. Unplug the fan.
  2. Locate the screws on the control panel.
  3. Using a screwdriver, unscrew each screw and remove the control panel.
  4. Unlatch the snaps on the main plastic covers using your flat-head screwdriver.
  5. Pull the blades up and out from the fan.

How to Clean a Honeywell Fan

We’ll walk you through the steps on how to deep clean Honeywell floor and table fans, such as the Turbo HT-900 model. This method involves dismantling the fan so you can get into every corner.

What You’ll Need

  • Screwdriver
  • Dish soap
  • Bowl of warm water
  • Microfiber cloths
  • Towel
  • Vacuum cleaner with a bristle attachment
  • A pipe cleaner, can of compressed air, or flexible duster
  • Face mask and goggles

1. Unplug and Dismantle the Fan

First of all, unplug and dismantle the fan using your screwdriver. Make sure to keep the screws in a safe place, so you don’t lose them.

2. Wipe Off Initial Dust and Debris

Use a dry microfiber cloth to wipe down the initial dust. Microfiber cloths are great dust collectors, so this is an effective first step. Depending on how dirty your fan is, you may need to go through a few cloths.

If you can remove the blades, we recommend that you do it, to provide you with a more effective clean.

3. Vacuum Up Extra Dust

Now that you’ve gotten rid of most of the surface dust, it’s time to get rid of any extra. Attach the bristle brush to your vacuum cleaner and use it to navigate around the fan. This will remove thick dust or dust that’s hiding in crevices.

4. Get into the Nooks and Crannies

Using your pipe cleaner, a can of compressed air, or a flexible duster, get into all the nooks and crannies. A vacuum cleaner and a microfiber cloth cannot get into all the small parts. But these handy tools can!

5. Wash With Soapy Water

Mix 1-2 tablespoons of dish soap in a bowl of warm water. Dampen a microfiber cloth in the solution and scrub the blades of your fan clean. Next, move onto the front and back grill. Avoid the fan motor since water and electricity do not mix.

Change the water and cloth if they’re getting filthy.


Rinse With Plain Water

Fill a bowl up with clear water. Dampen a fresh cloth and wipe down the blades and grill to remove any soapy residue.

7. Dry the Parts

Use a dry towel to wipe down the different parts. Then let the blades and grill air dry by placing them flat on a towel. This might take a few hours. Once all the parts are completely dry, put the fan back together.

How to Clean a Honeywell Fan Without Taking It Apart

If you want to quickly clean your fan without disassembly, this method is for you. You can give your fan a decent clean without opening it. This is a handy method for weekly cleaning.

What You’ll Need

  • Dusting brush
  • Can of compressed air
  • Microfiber cloths
  • Bowl of water
  • Dish soap
  • Vacuum with a bristle attachment
  • Face mask and goggles

1. Vacuum the Fan

After unplugging the fan and donning your protective gear, get your vacuum out. Using the bristle attachment, vacuum around the fan to suck out as much excess dust as possible.

2. Clean With Compressed Air

Use your compressed air to remove the excess dirt inside and outside the fan. If you can get in between the grills, this will provide a deeper interior clean.

3. Dust the Fan Exterior

Using your dusting brush, dust as much of the fan’s exterior as possible. Get in between the front and back grill to remove dust sitting on each grill. Dust builds up easily here, so doing this regularly is an excellent way to minimize dirt and debris in your fan.

4. Compressed Air Again

Give the fan another whizz with compressed air to remove any loose dust that’s settled from your dusting brush.

5. Clean With a Soapy Cloth

Mix 1-2 tablespoons of dish soap in a bowl of water. Dampen your cloth in the solution and wipe down the fan’s exterior. Make sure to get both the front and back, as well as in between the grill. Don’t forget the stand and other parts that may be affected by dust.

6. Dry With Another Cloth

Using a dry microfiber cloth, wipe down the fan to get rid of excess water. Let the fan air dry completely before using it again.

Cleaning a Honeywell Tower Fan

The cleaning process for tower fans, such as the QuietSet Tower Fan, is slightly different.

What You’ll Need

  • Vacuum cleaner or wet/dry vacuum with a bristle attachment
  • Dish soap
  • Bowl of water
  • Microfiber cloths
  • Cotton swabs or pipe cleaners
  • Can of compressed air
  • Screwdriver
  • Mask and goggles

1. Unplug the Fan

Unplug the fan and don your protective gear. Never clean a tower fan while it’s still plugged in, as this is unsafe.

2. Vacuum Excess Dust

Using your vacuum and bristle attachment, vacuum up excess dust from all around the fan. Get into the nooks and crannies. Don’t forget the air vents and the grill.

3. Remove the Fan Cover (Optional)

If you want to get into the inside casing, remove the fan cover. This is not necessary, but it will provide you with a deeper clean. If you decide not to remove the casing, you can still get a pretty sufficient clean.

4. Clean Small Spaces

With your cotton swabs or pipe cleaners, clean in the small spaces. This includes air vents, between the grills and other tiny areas where dust may be hiding.

If you’ve taken your casing off, make sure to do this on both sides of the grill.

5. Blow Compressed Air

Fire compressed air into other nooks and crannies. This will get rid of excess dust in small corners. If there is any dust hiding, this can do the trick!

6. Clean With Soapy Water

In a bowl of water, mix 1-2 tablespoons of dish soap. Dampen a microfiber cloth in the solution and start scrubbing the interior and exterior of the tower fan. Be absolutely sure to avoid any electrical parts, such as the plug and motor.

7. Vacuum the Filter

If yours comes with an air filter, remove it from the tower fan. Vacuum it well using the bristle attachment. Replace the air filter.

8. Wipe Dry

Using a fresh dry microfiber cloth, wipe the tower fan until it’s dry. Leave it a few more hours to completely air dry before plugging it back in.

Bonus Tip

If it’s been a while since you’ve cleaned your tower fan and it’s visibly caked with dust, we recommend taking it to a professional. They will knowledgeably deep clean the tower fan, ensuring no damage is done. Once dust gets into the motor or is saturating the filter, it can be challenging to clean it at home by yourself.

Why Did My Honeywell Fan Stop Working?

Here are some troubleshooting tips if your Honeywell fan is no longer turning on:

  • Your fan needs to be lubricated. Clean the fan and remove any debris. Lubricate the two metal components behind the blades with a 3-in-1 lubricant. Let the fan run for a few minutes until it’s functioning normally again.
  • The plug has blown a fuse. You’ll need to replace the fuse according to the manufacturer’s instructions. This can be found in your user guide. If that doesn’t work, try getting a new power cord.
  • Get a qualified electrician to check for loose or disconnected wires.
  • If your fan has a remote, perhaps the remote or control panel is not working. You may need to get a replacement remote.
  • The motor may be bust. Contact Honeywell for a replacement motor.
  • A fan blade may be obstructed. Remove the casing and check for any foreign objects. Remove them immediately and try turning the fan on again.


Why is My Honeywell Fan Making Noise?

Part of the charm to a Honeywell fan is that they’re quiet. If yours is making strange noises, it may be because of dust. When dust builds up, the blades become unbalanced, which can cause squeaky or rattling noises.

Another issue may be that there is a foreign object within the fan.

Opening up the fan, removing foreign objects, and deep cleaning the blades are great ways to eliminate annoying noises.

Lastly, lubricate the metal shafts behind the blades. Without lubrication, the fan can make squeaky high-pitched noises.

Can You Use Water to Clean a Honeywell Fan?

Do not aimlessly spray water at your fan. This can get into the motor, which is very dangerous. Electricity and water don’t mix!

However, you can use a soapy water solution to deep clean your fan. Just make sure you’re dampening a cloth and not oversaturating it. Then wait a good few hours before turning the fan back on. This gives it a chance to dry completely.

Does Cleaning a Fan Make It Work Better?

Cleaning a fan does make it work better. Fans are dust magnates and quickly become clogged with thick layers of debris. Regular cleaning ensures that the working parts are more efficient and you are not breathing contaminated air.

How Do You Remove a Ceiling Fan Light Cover?

The best way to remove a ceiling fan light cover is to support it with one hand while releasing the clips with the other. When you feel the weight of the light cover, it is free.

Can You Wash a Honeywell HEPA Filter?

You can wash a Honeywell HEPA filter, although you should always replace the filter if you want it to work as efficiently as intended.

How Do I Reset My Honeywell Fan?

The simplest way to reset your Honeywell fan is to switch it off. If you can’t perform this task within 30 seconds, turn the power off at the mains and switch it back on to reset the fan.

Feedback: Was This Article Helpful?

Thank You For Your Feedback!

Thank You For Your Feedback!

What Did You Like?

What Went Wrong?

How to Clean a Honeywell Fan with Easy Steps

Is the air-conditioner too expensive for your budget? Have a window or tower fan instead. However, as time goes on, your fan can get dirty as it rotates.

Without us realizing it, it filters the surrounding air, which isn’t 100% clean. Once it gets dirty, usually the performance of your fan drops little by little. It can even lead to stopping working. Wondering how to clean a Honeywell fan? Check the explanation below, and get insight on cleaning this cooling appliance.

It’s perfect for cleaning your fan every three weeks or a month. Besides improving your fan’s capability to provide cool air, cleaning the fan regularly can also help your fan deliver cleaner and fresher air. Here are the things you will need to clean out the Honeywell tower fan or window fan:

  1. Screwdriver
  2. Soft cloth. You can also get an unused, old shirt.
  3. Brush
  4. Surface cleaner
  5. Compressed air cans
  6. Vacuum cleaner

To start the cleaning process, first unplug the fan and use a head screwdriver to remove excess dirt from the floor fan, table fans and quietset tower fan, and then use a cloth to wipe away the dirt and dust from the cleaning fan. Here are the steps on how to clean a Honeywell tower fan:

  1. First, make sure that no electricity runs on the fan. Turn the tower fan off and unplug the cable from the electric socket.
  2. With your screwdriver, remove the screws which anchor the casing. Then disassemble the casing.
  3. Get a vacuum cleaner and a medium-sized brush. Gently place the vacuum on the fan blades while brushing off the dust with the brush. Do this simultaneously and thoroughly.
  4. With the surface cleaner and a cloth, clean the casing and other parts of the fan.
  5. Reassemble the casing and place the screws back.

Besides, below is a simple explanation of how to clean a Honeywell window fan.

  1. As usual, make sure you’ve unplugged the power cord in the first place. Then, place your window fan in an open space so it’ll be easier to clean it.
  2. Remove the grill by using your screwdriver. If you use a newer window fan model, usually, you only need to press a certain button to remove the grill.
  3. Clean the grill using your brush and a vacuum cleaner – just like in the tower fan’s steps. To clean it more thoroughly, you can even use a dishwasher/surface cleaner and a cloth.
  4. Clean the blades. The dishwasher can too be used for this step. As for the casing, you can use surface cleaner as using a dishwasher may be too tricky since the casing is too big for your sink.
  5. Lastly, dry all the components with a dry and clean cloth and put it all back together.

Well, that’s how to clean a Honeywell fan, especially a Honeywell window fan. The first thing to unplug the appliance off from any electrical power is the essential point. Besides, please turn off the fan first before disassembling it.

Read also: How to Clean a Furnace Filter Air Flow

It’s not difficult once you get accustomed to it. Take your time to disassemble the fan and clean it with a vacuum cleaner.

As an alternative, you can also use a wet cloth. Whatever it is, cleaning a fan regularly is highly recommended since it may bring many benefits for you.

Posted in Cleaning

Home Tips

HomeTips is an experienced author and expert technician. With years of practical experience in the field authored several informative articles on various aspects related to home improvement, including installation, maintenance, and repair.

How to clean Honeywell fans?

To clean a standard Honeywell fan, unplug it and remove the front grille and fan blades. Clean the fan with a mild dishwashing solution and dry the components before reassembling. To do this, you will need a screwdriver, soap and water, a mild dishwashing solution, a towel and cotton buds.

  1. Disconnect the fan from the mains

    Before disassembling or cleaning the fan, disconnect the fan from the power supply by unplugging the fan from the electrical outlet that powers the fan.

  2. Remove the front grille

    Inspect the fan to see how the front grille is holding up. On some models, the front grille is attached to the rear grille with clips around the perimeter of the fan. Other models are attached with a screw that must be removed. Determine how your fan is assembled and take the necessary steps to remove the front grille. If the fan grilles are stuck together, do not proceed.

  3. Remove the blades

    Remove the front grille, unscrew the cover holding the fan blades in place and remove the blades.

  4. Clean the fan components

    Use a mild dishwashing solution to clean the fan blades and front grille. Also clean the rear grille and fan base with soap and water. Do not immerse the fan base, including the motor, in water. Instead, wipe the surface with a towel. Remove dust accumulated in the crevices with a damp cotton swab.

  5. Assemble the fan

    Dry each component thoroughly, install the fan blades on the base and tighten the cap on the motor. Replace the grille and secure it to the fan base with clips or by replacing the screw.

Similar posts

How to reset a Honeywell thermostat?

Where can I find a wiring diagram for a Honeywell thermostat?

What are the models of Honeywell thermostats?

Other interesting posts

What are the tips for choosing a power inverter for your home?

What should I do if I forget my locker combination?

Is it better to wash in the morning or in the evening to save energy?

What is pink weeping cherry?

How do you measure the dimensions of PVC drainage pipes?

Does Princess House have an online catalog with price lists?

How do I know if the oven gas valve is broken?

What are the pros and cons of Bad Boy Zero Turn mowers?

What are the pros and cons of wall vents compared to floor vents?

What could be causing the GE refrigerator door to sag?

What products remove bath stains?

What is the best way to remove glue from wooden furniture?

What are the signs that it’s time to replace the nozzle on an oil burner?

What is the equivalent of L1154 battery?

Why do you need a fan for a solid fuel boiler?


Everyone knows what a fan is, but why and where to use it in a solid fuel boiler is not obvious to everyone at first.

Two types of fans are used for solid fuel boilers – supply and exhaust. If it’s very simple, the blower fan is placed at the “inlet” to the boiler, and the exhaust fan is “at the outlet”.

Now in more detail.

The blower fan is needed not only for forced air supply to the furnace, as we often hear from customers, but more for smooth temperature control (using the control unit) in the room (the effect of “we get cold, then we sweat” disappears). You set, for example, the desired temperature of the coolant (usually 60-70 degrees) or the temperature in the room (for example, on a room thermostat), and the control unit reacts to changes through the temperature sensor and makes the fan rotate faster or slower (or turn off altogether). With the help of a blower, it is possible to intensify combustion, for example, during the ignition of the boiler.
Installation of the fan in the boiler is carried out on the seat provided by the manufacturer (under the grate, in the combustion torch, in the side ventilation ducts or in another way). If such a place is not provided, it means that the manufacturer did not think over the possibility of forced ventilation – we would not recommend buying boilers from this manufacturer, otherwise you will have to modify the doors by hand (cut a hole, weld a flange, paint, etc.), and the design does not always allow this. Instead of a fan, a whole fuel supply mechanism (retort or flare burner) is often installed, with a fan inside, but more on that in another article on burners.

Blower fan

This type of fan has many names – turbine, primary air fan, boost fan, draft fan, forced air fan, etc. Actually, usually when they talk about a fan for a solid fuel boiler, they mean exactly it, since it is a tool on the way to automation of the combustion process.
As we already understood from the names of the fan, it pumps air, but where – let’s figure it out.

Modern European boilers and most of the Russian boilers are supplied by default with a blower fan, calculated according to the parameters of the boiler itself. Manufacturers immediately make the bottom door with a hole for the fan, with the landing dimensions of the fan flange, which will provide enough air to the furnace where the fuel is burned.
Let me digress a little to the issue of landing dimensions and flanges – Polish fan manufacturers adhere to standard sizes, that is, fans with the same parameters from different factories have the same flange. Domestic assemblies of fans also copy the parameters of the “Europeans” flanges. Therefore, the user of the boiler is not tied to a specific manufacturer, he can install any fan with the necessary parameters. How to choose a fan – we’ll talk in the next article.
So, air is needed to burn fuel. A bit of history. The very first and simple potbelly stoves or a coarse (coarse) heating stove have a movable damper (blower) below the grates, with which you can manually adjust the natural air supply to the combustion zone. The next stage in the development of automation of the combustion process was manual mechanical draft regulators – for example, Regulus RT4 or Honeywell FR124, which have a thermoelement, with the expansion or contraction of which they tighten or release a chain that is attached to the “blower” doors. This method is suitable for cases where natural draft is sufficient and when there is no electricity in the boiler area or there are interruptions in its supply. This controller is completely non-volatile. But the most modern method of automation is automation complete with a blower fan.
For example, you have a solid fuel boiler with manual fuel loading. Fuel, we all know, is raw, of poor quality, with a high ash content, with all sorts of impurities and commercial “bonuses”. In the process of combustion, it can smolder sluggishly, giving off little heat, losing efficiency, or it can even go out without enough air. These are reasons related to the fuel itself. And there are other reasons associated with the boiler – a small cross-section of the chimney, as a result of weak draft, errors in the calculations of the heating system, a small inlet for supplying fresh air, or generally weak supply ventilation of the boiler room. Of course, the list can be supplemented, but the essence of the problem is that there is no ideal case in life, there are always errors, coefficients of performance (COP), etc. But one thing is eternal – we all want comfort and this is our main “motivator” to action.
What has already been invented? – boiler automation processes information on the basis of a temperature sensor installed at the outlet of the boiler. The user sets a comfortable temperature in the room, and the automation is “blown” by a fan into the furnace. The boiler began to cool down – it is necessary to “blow”, if it is warm enough in the room – the fan is turned off, the fuel burns naturally. If it is necessary to extinguish the boiler, the air supply is blocked by a damper or diaphragm on the fan. In pyrolysis boilers with forced air circulation, in general, pressurization is always used, since the operation of such boilers is based on such ventilation. What are the fans and how to choose them for your boiler, we will consider in the next article.
But this is a very primitive description – if more deeply, now there are a huge variety of types and types of automation for boilers, from simple ones for controlling only a circulation pump or fan speed – to complex microprocessor controllers, with remote Internet modules or GSM modules, when you can control the operation of the boiler being far from home and “heating up” your house before arrival. What are the automation will talk with another article.
Air injection, especially controlled air injection by means of automation, not only provides comfort in operation, but also fuel savings of up to 40%. Thoughtless blowing can carry warm gases into the chimney, and the actual heat will go into the chimney uselessly. Therefore, automation greatly facilitates operation, helps with ignition, maintains the set temperature and gives signals in emergency situations.
Therefore, we can conclude that blowers with a control unit in a solid fuel boiler are a “man’s friend”, a fireman and your personal accountant.

Exhaust fans

What are exhaust fans for? This is a controversial issue, the opinions of experts are divided. If everything is clear with the blowers – they help the combustion process and have practically no drawbacks, then how much the exhaust fans help the boiler – let’s figure it out.
So the exhaust fan “pulls” on itself, but not air, as in the case of turbines – but combustion products, or more precisely, flue gases. And here a very thin line appears, since these very products of combustion and flue gases must have time to give maximum heat to the coolant and exit into the chimney already cool and “worked out” their purpose. A common misconception is that if there is poor draft in the chimney, then it is enough to put a smoke exhauster and everything will return to normal. But there are important points to consider as well. Firstly, for the correct operation of the smoke exhauster, the same boiler automation is needed as in the case of a blower fan. Ideally, with an additional flue gas sensor that measures temperatures in higher ranges, and is designed just for this. We will describe recommendations for choosing automation for exhaust fans in the next article. Secondly, the main thing is not to overdo it and not to “pull” the heat out of the boiler “into the pipe”. In our practice, we often saw chimney pipes heated “red-hot” at the very exit from the boiler. This point must be correctly captured and configured or contact the installation specialists. Sometimes it is even easier to normalize draft by installing a simple non-volatile chimney draft stabilizer.

In general, very often it is enough to follow a few rules to avoid installing a smoke exhauster:
– correctly calculate the height of the chimney and its diameter (or follow the recommendations of the boiler manufacturer)
– never reduce the diameter of the outlet pipe from the boiler to the chimney
– organize the correct air flow to the boiler room
– insulate the chimney
– avoid “turns” of the chimney, try to make it as smooth as possible

When should an exhaust fan be installed?
If you have a boiler with a complex heat exchanger, where gases change their direction several times before reaching the chimney, boiler manufacturers recommend a chimney fan, as it maximizes heat removal from combustion products and increases boiler efficiency.