Should a Wall Mounted TV be Tilted?
If you’re wondering if your equipment is correctly installed and adjusted, or curious if you should invest in a new, more versatile mount, there are a few major factors when determining whether or not to tilt a TV. Mounts with at least some versatility and adjustment are becoming a standard product on the market, but is it a requirement?
Should a wall-mounted TV be tilted? If the TV is above the viewer’s eye line, a downward tilt can prevent neck and eye strain. Tilting a screen can also prevent glare from inconveniently placed lights. Based on the aesthetic design of the space, a tilted screen may also fit in better.
Maybe one of these situations applies to you, but you’re uncertain about which mount is going to fit your home theater setup. Below, we’ll discuss the types of mounts and their benefits, focusing on tilted wall mounts.
What is a Tilted TV Wall Mount?
A tilted TV wall mount is any mount that is bolted directly into the wall and has a mechanism to adjust and face your TV downward. Units like the Mounting Dream Tilt TV Wall Mount (on Amazon) are reasonably priced and relatively simple to install. These mounts come in handy for TVs that have to be mounted higher up, or when other features of the room call for an angled screen.
While often confused or equated to the full-motion mounts, tilt mounts do not offer any left to right movement or move out (away) from the wall. They’re typically suggested when mounting in a corner, flex space, or any other scenario where the TV may not be the main focus, or if it needs to be minimized quickly.
Tilted vs Flat TV Wall Mounts
If you have your TV mounted on your wall at eye level, across from your couch or another favorite seat for viewing, chances are you are going to be perfectly content with a flat wall mount. Flat TV wall mounts like the SAMSUNG No Gap Wall Mount (on Amazon) can’t move, but they can be mounted flush with the wall which can be an aesthetic advantage.
However, if you’re unable to rewire or relocate your outlets, you may find the extra cord from your wire run may be harder to hide behind the TV when it’s flush.
Also, flat TV mounts do not allow for any adjustment after installation.
With a tilted mount, there’s room for the TV to be adjusted downward, but that means it is mounted a few inches off the wall (at least), leaving a gap behind the TV. While this can quickly kill the “picture-frame” type illusion some find preferable, some enjoy the space to hide cabling and sometimes even some smaller cable boxes or other streaming equipment.
While there are benefits to each mount aesthetically, the option of the tilt can come in handy for a lot of viewers. Sometimes people do not have any good spot for watching TV because of the room’s features, and a tilted mount can work around limitations of a space.
Pros and Cons of Tilted TV Wall Mounts
Now that you understand how the two types of mounts compare, let’s focus in on some of the unique features of tilted wall mounts.
Pros
Reduced Neck and Eye Strain
If you’re getting stiff or feeling fatigued after only a short time of watching, it could be that your TV is mounted too high.
Try adjusting to a downward tilt, if the option is available, to see if some discomfort is eased. If you have a flat wall mount, you may consider adjusting its height, but a tilted mount makes this adjustment much easier. You should also review our article on how far away from your screen you should be, based on its size.
Glare Resistance/Reduction
A tilted TV mount allows you to angle the screen not just once, but as necessary, which means if you have issues with sun glare to lights in your house, you can tilt the TV as these lights shift throughout the day quickly and easily.
Flexibility of TV Mounting Location
If you have a high fireplace that pushes the TV up, or if the shape of your room forces you to mount the TV in a corner or other awkwerd wall, a tilted mount can help make the situation work, offering you at least a little more flexibility.
Space to Hide Cables & Devices
With plenty of space for cables and to hide wall plates, you can manage and camouflage your cable runs with ease behind these mounts.
As the size and weight of cable boxes, Apple TV’s, Rokus, Firesticks, and the like continue to decrease you can bet more straight to TV mounts will be coming as well, perfect for the space between your TV and the wall.
Cons
Not Flush with the Wall
Some prefer the “picture frame” look of a flush-mounted Television, which allows it to blend into the space better. You lose some of this magic with a tilted mount, because of the gap with the wall.
Not as Dynamic as Full Motion Mounts
While more versatile than the flat wall mount, the range of the full-motion mounts can’t be beat. You may not need this full range of motion, though, which is usually reserved for when you need to mount a TV in a corner. As with any home theater hardware option, the tilted mount is a specific tool that solves specific problems. It won’t be as dynamic as a full-motion mount, but you also may not need that.
More Complicated Install
There’s no question that a tilted mount will be harder to install than a flush-mount, but just remember that hardware manufacturers are designing these systems so that they can be installed by homeowners for the most part.
It can be a little intimidating, but just follow the instructions and you’ll be fine.
A Word to the Wise
If you are hiring an installer to perform the work for you and they bring up the various mounts, they are not attempting to upsell you on an unnecessary product, they simply want to ensure they do the best job for the space and you get maximum enjoyment from your new equipment. Remember to consider the options against your needs, and make sure you pick solutions that will solve your unique problems.
Tilting TV – Wall Mount Instructions & Tips
– Mount-It!
As TVs have become thinner while providing greater visual fidelity, wall mounting has become the go-to solution for setting up screens in a home setting. While fixed TV mounts offer simplicity and a clean aesthetic, tilted mounts are becoming more popular as a means of getting the best viewing experience while allowing adjustments on the fly for different TV viewing situations and the ability to hide wires.
However, once you choose a tilting TV wall mount, knowing when and how to tilt your TV with them can be confusing. How much tilt for a wall mount TV do you need? Read on to learn more.
Tilting TV Wall Mount – What is it?
Where fixed wall mounts are (as the name states) fixed at a set angle, tilted wall mounts offer vertical angle adjustment, which allows you to change the viewing position. The one potential downside to this is that it requires your TV to be a bit farther from the wall in order to provide space for tilting. That usually means at least two inches of space, while fixed wall mounts allow your TV to be nearly flush with your walls.
Why Get a Tilt TV Wall Mount?
Aside from the clean aesthetic, a tilted wall mount allows for varying degrees of vertical adjustment. This is optimal if your TV is placed above the optimal viewing level, allowing you to tilt the screen down to prevent neck strain while you’re watching your favorite shows. The angle adjustment can also come in handy if you’re dealing with any glare or screen reflections from room lights or open windows without blinds.
How Much Tilt for a Wall Mount TV?
TV Wall Mount Tilt Viewing Height
Figuring out the right angle for tilting starts with figuring out the viewing height of your TV. Ideally, your TV should be high enough such that the exact center of the screen is at eye level when you are sitting down. That works fine if it’s just you watching TV, but that’s not exactly feasible if you have multiple people watching one screen. When you can’t achieve the “ideal” height, you have to compromise and find a comfortable medium for everyone.
Even if you are considering yourself, viewing angle can change based on your height, your sofa, the monitor’s height, and the distance from your seat to the screen. The best place to start: measure your approximate seated eye height from the floor using some measuring tape, and then take that measurement to your wall. That gives you a general indication of where the center of your screen should be. Assuming that the mount connects to the center of the TV, that should give you your sweet spot.
Most of the action on TV occurs in the middle third of the screen. Take the height of your TV and divide by three. Measuring that from the bottom edge of the screen and you get a general idea of where the middle third starts, with some variations based on bezels and frames.
In reality, a lot of this comes down to trial and error, but remember that you don’t have to look for an exact formula. You’re looking more for a comfortable range.
How to Adjust and Tilt a Wall Mount TV?
Viewing angles are also fairly subjective. Having a tilt of +/- 25 degrees is acceptable, but this can also depend on your room situation. Your own comfort, glare reduction, and lack of neck strain are more important than exact degrees of tilt.
Furthermore, thanks to the progression of technology, TVs can be very forgiving when it comes to viewing angles. Based on the clarity, refresh rate, resolution, and overall image quality of the modern TV, getting to any sort of “sweet spot” with the angle is almost superfluous.
Tilting tv wall mounts can take the neck strain out of your viewing experience and reduce glare, making your TV sessions much more comfortable.
Frequently Asked Questions (FAQ)
How to Take the TV Off a Tilting Wall Mount?
Remember to be careful when removing the TV from the wall mount, as TVs can be heavy and fragile. Ask a friend or family member for help lifting the TV. To take a TV off a tilting wall mount, you can follow these steps:
-
Unplug any cables or wires that are connected to the TV.
-
Locate the locking mechanism that holds the TV onto the wall mount. This is usually located on the bottom of the mount. You might need a screwdriver to loosen the locking mechanism.
-
Once the locking mechanism is loose, gently lift the TV up and off the mount. Depending on the size and weight of the TV, make sure you ask someone for assistance.
Should a Wall Mounted TV Be Tilted?
Whether or not a wall mounted TV should be tilted the specific viewing setup in your room and your personal preferences.
It’s always a good idea to experiment with different angles and positions to find the setup that works best for you.
If you are mounting the TV at eye level or slightly above eye level, you may not need to tilt the TV at all. However, if the TV is mounted higher up or lower down on the wall, tilting the TV can help improve the viewing angle and reduce any discomfort or strain on your neck.
Tilting the TV can also be useful if there are windows or lights in the room that create glare or reflections on the screen. Tilting the TV downward can help reduce these distractions and improve the viewing experience.
How to Adjust the Tilt of a TV Wall Mount?
To adjust the tilt of a TV wall mount, follow these steps:
-
Locate the tilt adjustment knobs or screws on the TV wall mount. These are usually located on the sides or bottom of the mount.
-
Loosen the knobs or screws with a screwdriver or wrench.
-
Gently adjust the angle of the TV to the desired tilt.
-
Tighten the adjustment knobs or screws back up to secure the TV in place. Make sure to tighten them enough so the TV doesn’t move or shake, but not so tight that the mount or TV is damaged.
-
Check the tilt and angle of the TV from different viewing positions to ensure that it’s comfortable to watch and not causing any strain on your neck.
If you’re unsure of how to adjust the tilt of your specific TV wall mount, consult the manual that came with the mount or contact the manufacturer for assistance.
How Much Should a TV Wall Mount Be Tilted?
The amount a TV wall mount should be tilted depends on the viewing angle of the room and personal preference. However, as a general guideline, it’s recommended to tilt the TV down slightly if it’s mounted higher up on the wall, and tilt it up slightly if it’s mounted lower on the wall.
The ideal tilt angle also depends on the size and type of TV you have. For example, larger TVs may require a more significant tilt to provide an optimal viewing experience, while smaller TVs may only need a slight tilt.
As a general rule of thumb, it’s recommended to tilt the TV between 5 to 15 degrees for the best viewing experience. However, you should adjust the tilt angle to suit your specific viewing needs and comfort.
Sources:
1: https://www.crutchfield.com/S-xdaPtu1gq3f/learn/HDTV/choosewallmount.html
2: https://www.tomsguide.com/us/how-to-mount-tv,news-24719.html
Back to Mount-It! Blog
TV bracket 37″-70″ tilt-swivel ONKRON (M5)
TV bracket 37″-70″ tilt-swivel ONKRON (M5)
OverviewReviews (0)FAQ
Brand:
On cron
Characteristics
Manufacturer:
Onkron
Type:
Bracket
Screen size:
37-70″
Body material:
Steel
Colour:
Black
Maximum load:
36 kg
VESA mounting standard:
300, 400×400 mm
View all
Categories
Brackets
Description
Wall mounted The ONKRON M5 Tilt-and-Swivel Mount in black is designed for displays from 37″ to 70″ (93.
98 – 177.8 cm).
It is perfect for modern digital panels with a wide diagonal and light weight. The arm can withstand up to 36.4 kg. Reliable fastening to the wall will give a sense of security to you and your loved ones. Also, the bracket is one of the most maneuverable in its category.
It has the widest range of tilt and swivel options, and the screen can be adjusted vertically and horizontally. Sturdy and durable, this elegant bracket will be a stylish addition to your home interior.
Various VESA mounting options:
The bracket is versatile due to the many VESA sizes provided by the manufacturer – 100×100, 200×100, 200×200, 200×300, 200×400, 300×300, 400×200, 400×300, 400×400 mm.
Long reach from wall:
It allows the arm to be swiveled up to 140°. To rotate the TV, you do not need to use additional devices or make efforts. You can rotate the TV panel and change the distance from the wall with a slight movement of your hand, while the TV will lock in the adjusted position.
Wire management system:
The built-in cable channel allows you to hide and fix the wires for convenience and aesthetic appearance, and plastic decorative trims hide all kinds of mounting fasteners.
Substantial tilt angle -2° to +10°:
Enjoy a wide range of TV viewing positions thanks to the wide range of tilt adjustments. These features will allow you to enjoy the viewing experience. You can also comfortably place the TV at high altitude.
Features
|
Manufacturer |
Onkron |
|
Type |
Bracket |
|
Screen size |
37-70″ |
|
Housing material |
Steel |
|
Color |
Black |
|
Maximum load |
36 kg |
|
VESA mount standard |
100×100, 200×100, 200×200, 200×300, 200×400, 300×300, 400×200, 400×300, 400×400 mm |
|
Features |
Distance from wall 42-452 mm |
|
Adjustment method |
Tilt, swivel |
|
Warranty period 9000 3 |
60 months |
Q&A
Name
Field “Name” is not filled
Question
Question text must be at least 3 characters long
We use cookies to make this site better for you.
TV brackets 85 inches
Bracket ARTKRON Flat-1000
Static bracket for TVs with VESA standard 400×400, 600×400, 800×400, 1000×400 mm., load up to 100 kg.
Code: 102803
| Maximum load | 100 kg |
| Distance from wall | 43 – 43 mm 90 087 |
| VESA standard | 600×400, 800×400 |
| TV size | 55″-70″, 75-100″ |
| Weight | 8 kg 0x400, 800×400, 1000×400 mm, load up to 100 kg
TV bracket Emmy Mount DF90-T Tilt bracket for TVs 50-85 inches, with VESA standard 400X400, 600X400, 800X600 mm., load up to 91 kg. 082 |
| Maximum load | 91 kg |
| TV bracket type | Inclined |
| Distance from wall | 78 – 78 mm | VESA standard | 300×300, 400×400, 600×400, 800×400, 800×500 |
| TV diagonal | 55″-70″, 75-100″ |
TV Tilt Mount 50-85″ VESA Standard 400X400, 600X400, 800X600 mm, load up to 91 kg.
Onkron UT9 TV Mount
Tilt bracket for TVs 50-85 inches, with VESA standard 400×400, 600×400, 800×600 mm., load up to 91 kg.
Code: 113783
| Maximum load | 91 kg |
| Distance from wall | 78 – 78 mm |
| VESA standard | 300×300, 400×400 , 600×400, 800×400, 800×500 |
| TV diagonal | 55″-70″, 75-100″ |
TV Tilt Mount 50-85″ VESA Standard 400×400, 600×400, 800x600mm, load up to 91kg
TV bracket Vivanco BFMO 8560 (37990)
Swivel bracket for TVs from 40 to 85 inches, VESA 200×200, 300×300, 400×400, 600×400 mm, load up to 60 kg
Code: 114636
9 0082
Swivel bracket for TVs from 40 to 85 inches, VESA 200×200, 300×300, 400×400, 600×400 mm.
, load up to 60 kg.
Bracket Uniteki FN1906T
Static TV bracket for VESA 200×200, 300×300, 300×400, 400×400, 600×400 mm., load up to 50 kg.
Code: 115728
| Maximum load | 50 kg |
| TV bracket type | Fixed |
| Distance from wall | 22 – 22 mm |
| VESA standard | 200×200, 300×300 , 400×200, 400×400, 400×600, 400×800, 600×200, 600×400 |
| TV Diagonal | 40″-52″ |
Static TV Mount for VESA 200×200, 300×300, 300×400, 400 x400, 600×400 mm, load up to 50 kg.
TV bracket Peerless SF680P
TV bracket with VESA standard from 400×400 to 1100×650 mm, load up to 158 kg.
Compatible with most TV models up to 98 inches.
Code: SF680P
| Maximum load | 130 kg |
| TV bracket type | Fixed |
| Distance from wall | 44 – 44 mm |
| VESA Standard | 400×400, 600×200, 600×400, 800×400 |
| Feature | large base |
TV bracket with VESA standard from 400X400 to 1100X650 mm.
, load up to 158 kg.
Compatible with most TV models up to 98 inches.
Bracket for TV Wize Pro T63X
Bracket with extension system, for TVs with standard, VESA 200×200, 300X300, 400X400, 600X400, 800X400 mm., load up to 70 kg.
Code: 116056
| Maximum load | 70 kg |
| Distance from wall | 78 – 134 mm |
| VESA standard | 200×200, 300×300, 400×200, 400×400, 600×200, 600×400, 800×400 |
| TV Diagonal | 40″-52″, 55″-70″ |
Drawer Mount, for VESA TVs 200×200, 300X300, 400X400, 600X400, 800X400 mm, load up to 70 kg.
Bracket for Wize Pro T55X TV
Bracket with extension system, for TVs with standard, VESA 200×200, 300X300, 400X400, 600X400 mm., load up to 70 kg.
Code: 116060
| Maximum load | 70 kg |
| 0087 | |
| Distance from wall | 78 – 134 mm |
| VESA standard | 200×200, 300×300, 400×200, 400×400, 600×200, 600×400 |
| TV diagonal | 40″-52″, 55″-70″ |
Bracket with drawer system, for standard TVs, VESA 200×200, 300×300, 400X400, 600X400 mm.
, load up to 70 kg.
TV bracket Vogels PFW 6855
Swivel bracket for TVs from 60 to 80 inches, VESA 400X400, 600X400, 800X500 mm., load up to 227 kg.
Code: 104318
| Maximum load | 227 kg |
| 0087 | |
| Distance from wall | 79 – 404 mm |
| VESA standard | 200×200 , 300×300, 400×400, 600×400, 800×400 |
| Feature | 2×2 elbows, large base |
TV swivel bracket 60″ to 80″, VESA 400X400, 600X400, 800X50 0 mm., load up to 227 kg.
TV bracket Kromax Star Pro-111
TV bracket 60-100 inches, VESA from 400×400 to 1000×700 mm, load up to 103 kg.
Compatible with most TVs up to 100 inches.
Code: 111499
| Maximum load | 103 kg |
| TV bracket type | Fixed |
| Distance from wall | 35 — 35 mm |
| VESA standard | 400×400, 600×400, 800×400 |
| Feature | 2×2 elbows |
TV bracket 60-100 inches, VESA from 400×400 to 1000×700 mm.
, load up to 103 kg.
Compatible with most TVs up to 100 inches.
TV bracket Kromax Star Pro-112
Tilt TV bracket 60-100 inches, VESA from 400×400 to 1000×700 mm. Load up to 103 kg. 4 Inclined
Tilting bracket for TVs 60-100 inches, VESA from 400×400 to 1000×700 mm. Load capacity up to 103 kg. Height 600-1000 mm., VESA 200×200, 300×300 400×200, 400×400, 600×400 mm, load up to 100 kg.
Code: 114031
| Maximum load | 100 kg | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| VESA standard | 200×200, 300×300, 400×200, 400×400, 600×400 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Diagonal TV a | 26″-40″, 40″-52″, 55″-70″ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | 18 kg. Height 600-1000 mm., VESA 200×200, 300×300 400×200, 400×400, 600×400 mm, load up to 100 kg.
TV bracket Vogels PFW 6910 (black) Tilt TV bracket 70-120 inches, VESA 100×200, 200×200, 300×300, 400×200, 400×400, 600×400, 800×400,1 200×800 mm., load up to 165 kg. Article: 114394
Tilt bracket for 70-120″ TVs, VESA 100×200, 200×200, 300×300, 400×200, 400×400, 600×400, 800×400, 1200×800 mm, load capacity up to 165 kg. Ultramounts UM815F Static VESA 200×200 TV Mount , 300×300, 300×400, 400×400, 600×400, 800×400, 900×600 mm., load up to 75 kg. Code: 114644
Static TV bracket for VESA 200×200, 300×300, 300×400, 400×400, 600×400, 800×400, 900×600 mm, load up to 75 kg. Bracket for TV Vivanco BFMO 6560 (37982) Swivel bracket for TVs from 40 to 85 inches, VESA 200×200, 300×300, 400×400, 600×400 mm., load up to 50 kg. Code: 111829
Swivel bracket for TVs from 40 to 85 inches, VESA 200×200, 300×300, 400×400, 600×400 mm., load up to 50 kg. TV bracket Arm-Media Plasma-1 Arm-Media Plasma-1 bracket for TVs from 32 to 90 inches, VESA 50×50, 100×100, 200×200, 300×300, 400×400, 600×400 mm., load up to 55 kg. Code: 111015
Arm-Media Plasma-1 Mount for 32″ to 90″ TVs, VESA 50×50, 100×100, 200×200 , 300X300, 400X400, 600X400 mm. TV bracket Tuarex Alta-657 Swivel bracket for TVs with VESA holes 200×200, 300×300, 400×400, 600×400 mm, load up to 80 kg. Code: 115701
TV swivel bracket with VESA 200 holes x200, 300×300, 400×400, 600×400 mm, load up to 80 kg TV mount Tuarex Alta-658 Swivel TV mount with VESA holes 200×200, 300×300, 400×400, 600×400, 800×500 mm, load up to 100 kg. Code: 115707
TV swivel bracket 43-90 inch, VESA 200×200, 300×300, 400×400, 600×400, 800x400mm, load up to 80kg. TV Mount Uniteki FN1610 Fixed TV Mount 60-100 inches, VESA 200×200, 300×300, 400×400, 600×400, 600×600, 900×600 mm, load up to 75 kg. Code: 115744
Fixed bracket for 60-100″ TVs, VESA 200×200, 300×300, 400×400, 600×400, 600×600, 900×600 mm, load up to 75 kg. |
, load up to 55 kg.
