Tru bolt electronic lock troubleshooting: Tru Bolt Electronic Lock Troubleshooting: Complete Guidance

Tru Bolt Electronic Lock Troubleshooting: Complete Guidance

Tru-Bolt electronic locks are popular because they are easy to install and program. But Tru bolt electronic lock troubleshooting is a common problem many people have. If your tru bolt door lock is not working properly, it can cause serious problems. You will need to figure out the reason behind the problem.

This article will guide you through some common issues and how you can troubleshoot common problems with your tru bolt lock.

Common tru bolt electronic lock problems and troubleshooting

The Tru bolt electronic lock keypad is not working.

If your lock keypad does not respond, there could be several reasons why this is happening:

  • It might just be that the batteries are dead. Replace with four high-quality alkaline batteries.
  • Ensure the batteries are installed correctly; if they’re still not working after installing new ones, you may have to replace your lock altogether.
  • The dirt has collected on top of them and caused an electrical short circuit; try wiping down both sides with a damp rag while turning off the power at the breaker box before giving us a call so we can help diagnose further issues.
  • The keypad may be locked out due to an incorrect code. Now please wait 60 seconds;

Please note that ShineACS Locks is just writing the Tru bolt electronic lock troubleshooting article and providing possible handling suggestions, not offering after-sales service. If you can’t finally solve your problem with our article content, please contact the Official aftermarket.

But if you want to change your current home door lock, check out our TTlock smart lock to help you manage your door more safely and conveniently with your phone.

The Tru bolt lock keeps beeping.

If the lock is beeping and you cannot get it to stop, there are a few things that you can try to do.

  • Check the battery. If the battery is low, replace it with a new one.
  • Verify that all parts are installed correctly.
  • Check if there is any dirt or debris on the keypad. If so, use a soft cloth, or cotton swab dipped in rubbing alcohol and clean carefully around the edge of the outer cover and inside your keypad.
  • Check all wires for breaks or frays in them.

If none of these options work, please get in touch with TRU bolt customer service with details about what happened when changing batteries or any other possible solutions you may have tried before calling us.

The tru-Bolt keypad Lock is not working.

You may have accidentally locked yourself out of your home or office, but not all hope is lost! If your tru bolt electronic lock isn’t working properly, Here are some common problems and their corresponding solutions:

  • Check that you have entered the right user code. If not, try resetting the lock by holding down both buttons on the keypad for 15 seconds until it beeps twice. Then enter a new combination—one that works!
  • Make sure there is enough power in the battery compartment. If you notice it is low on power or dead, replace it with a new one as soon as possible.
  • Replace any batteries if they are corroded or damaged so they can perform properly and accurately read how much energy they contain.
  • Check any wires connecting the keypad and lock mechanism; if these are frayed or broken, they should be replaced immediately so that no further damage is done when using this device again!
The Tru bolt keypad is not lighting up.

If your tru bolt keypad is not lighting up, there are a few possibilities:

  • The batteries may be dead or low on power and must be replaced. If that’s the case, you should replace the batteries with new ones before testing again.
  • Check to make sure that the batteries are inserted correctly. If this is not the issue, try removing and reinserting them until the light comes on.
  • The battery contacts inside your lock may have corrosion built up on them, hindering the flow of electricity from the batteries to the chip in your electronic lock. If this is suspected, you should clean all surfaces with a dry cloth and alcohol wipes until they are residue-free, then try pressing the buttons again.
The Tru bolt Interior Knob will not turn:

If you Tru bolt, the electronic lock interior Knob will not turn, mostly because the lock knob or vertical tailpiece is installed incorrectly. Now please remove the interior assembly and reposition the interior knob. With the deadbolt Latch retracted, verify that the tailpiece is vertical.

If this still does not work, there may be a problem with the lock cylinder or deadbolt latch assembly.

Check these components for damage before replacing them; if they’re damaged beyond repair, take photos so that you can show us exactly what’s wrong if we need to send out a technician as part of our warranty process.

Deadbolt Latch is sticking:

If your tru bolt electronic lock deadbolt Latch is sticking, This can happen when the Installation screws of the lock may be too tight and loosened. Now please try the following solutions:

  • Remove Interior Assembly.
  • Slightly loosen the Mounting Plate screws.
  • Lock and unlock using the Key.
  • Reattach Control Wire and Interior Assembly.

Also, if you don’t keep your keypad clean (especially after using cleaning supplies) or if there’s debris between your keypad and its frame.

The lock will not work electronically.

If the tru bolt electronic lock does not work electronically, you may need to check the following things:

  • Check that all batteries are fresh, high-quality Alkaline Batteries.
  • Check for proper polarity (+ -) of all batteries.
  • Check that the Control Wire is attached to the Interior Assembly and not damaged.
  • Check each wire for loose or disconnected wires.
  • Disconnect the wiring harness and reconnect the wiring harness.

If you’ve changed your battery and it still does not work after that, there is an electrical fault with your lock, and you will need to call a professional locksmith to repair it.

The lock gives an error signal when opening or locking, and Deadbolt Latch will not extend or retract completely when the door is closed.

If this happens, please try to solve it with the following steps:

  • Unlock the door using the Key or Interior Knob. While the door is open, check that the Deadbolt Latch operates smoothly.
  • Check for proper alignment of the strike plate; adjust as needed to ensure there is no binding against the Deadbolt Latch.
  • Make sure the tailpiece is vertical and straight up and down.
The keypad beeps, and LED flashes.

If your tru bolt electronic lock keypad beeps and lead flashes, please replace the old batteries with four new high-quality alkaline ones.

Tru bolt electronic lock beeps and lights.

You may be experiencing a problem with the tru bolt electronic lock if it’s beeping, flashing, or showing different numbers. The following is a list of common issues and how to determine the cause:

  • One long beep and LED illuminates green: Unlock / Valid programming:
  • Two short beeps and LED illuminates red: Lock
  • Two short beeps and LED flashes red twice: Invalid Programming
  • Short beeps and LED flashes red seven times: Low Voltage
  • Four short beeps and LED flashes red four times: Super Low Voltage
  • Three long beeps LED flashes red three times: Lock Error
  • Two short beeps three times LED flashes red six times: Repeat operation after Lock
  • Two short beeps and an LED illuminate red on each attempt: 4 Incorrect code entry attempts
  • One long beep and one short beep, and LED illuminates green: Power on
  • One long beep and one short beep, and the LED illuminates green(may occur several times or once in a while): Chip Reset

If neither of these steps works, there is likely a problem with your lock’s wiring or electrical components. You may need to contact an electrician or locksmith who can perform further diagnostics on your system.

Tur bolt customer service

If you are having any problems with your lock or if you need help setting up the app, here are some resources for getting in touch with tru bolt’s customer service team:

  • Phone number: 888-232-3574
  • Email address: [email protected] (this is not a live chat feature)
  • Tru bolt website: https://www.truboltlocks.info/. The website offers more information about their product line, company history, and a contact page to submit feedback on your experience using their products or services.
  • Tru bolt Youtube Channel:  https://www.youtube.com/channel/UCgLunUHxOVQhvoZp3xkesjA/featured

Tru bolts electronic lock manual.

If you want to know more about tru bolt electronic lock programming, installation, and troubleshooting, you can download and check the following tru bolt electronic lock user manual for reference.

  • Tru Bolt Classic Digital Deadbolt With Keypad User Manual
  • Tru Bolt Classic Digital Deadbolt With Touchscreen User Manual
  • Tru bolt classic Digital Knob with Keypad User Manual
  • Tru Bolt Classic Digital Lever With Keypad User Manual
  • Tru bolt Gemini Biometric Enabled Deadbolt with Keypad User Manual
  • Tru bolt Infinity Bluetooth Deadbolt With Keypad User Manual
  • Tru Bolt Orion Wi-Fi Enabled Deadbolt with Keypad User Manual

1
Tru Bolt Electronic Lock Troubleshooting: Complete Guidance

FAQs About Tru Bolt Electronic Lock Troubleshooting

Author

Other Recommended Articles About Home Smart Lock

Details Kwikset Smart Key Problems and Troubleshooting Guide

Read more

https://www.acslocks.com/wp-content/uploads/2023/05/Details-Kwikset-Smart-Key-Problems-and-Troubleshooting-Guide. png
555
959
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-05-30 22:12:052023-05-23 17:58:25Details Kwikset Smart Key Problems and Troubleshooting Guide

What Is a Deadbolt Lock, and What Types of Deadbolt Locks?

Read more

https://www.acslocks.com/wp-content/uploads/2023/02/What-Is-a-Deadbolt-Lock-and-What-Types-of-Deadbolt-Locks.jpg
450
800
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-02-03 20:52:092023-05-25 15:50:16What Is a Deadbolt Lock, and What Types of Deadbolt Locks?

Brinks Digital Deadbolt Troubleshooting and Programming Guide

Read more

https://www.acslocks.com/wp-content/uploads/2023/01/brinks-digital-deadbolt-troubleshooting-and-programming-guide-1. jpg
450
801
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-01-30 14:44:482023-04-24 12:15:25Brinks Digital Deadbolt Troubleshooting and Programming Guide

Kwikset SmartCode 913 Programming and Troubleshooting Guide

Read more

https://www.acslocks.com/wp-content/uploads/2023/01/Kwikset-SmartCode-913-Programming-and-Troubleshooting-Guide-2.jpg
450
800
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-01-27 10:13:312023-04-24 12:16:11Kwikset SmartCode 913 Programming and Troubleshooting Guide

Tru Bolt Electronic Lock Not Working (This Works)

Smart Homes

ByJane Harmon

There are various aspects to consider when purchasing the correct device for your home security.

This makes it very challenging for those purchasing it for the first time.

Tru-Bolt has dominated the locks market for its ability to meet customer satisfaction. These types of locks are very simple to install.

Nevertheless, using these door locks frequently results in issues.

Why Is Tru Bolt Electronic Lock Not Working?

Having problems with Tru-Bolt electronic locks is common. 

Some of these issues are common and easy to handle in the comfort of your home.

These issues include:

  • Degraded or dead batteries. Get fresh alkaline ones and check the installation.
  • The contacts of the batteries have rust building up on them. It hinders the flow of electricity so make sure the surface of the contacts is clean.
  • Faultiness in the installation of the keypad. Fasten the keypad to the safe and confirm that the wires connecting the keypad and the lock are not faulty. Always confirm that the safety of your Tru-Bolt is functional; instances of the locks getting blocked and out of order have been reported.
  • Low or no power supply. Always ensure that there is a power supply connected to your Tru Bolt Electronic lock.

How to Get Around Tru Bolt Malfunctions

There are solutions to many of the inconveniences that come about when Tru Bolt malfunctions.

Some of these problems are discussed in this article and they are as follows.

On the Tru-Bolt, the Electronic Lock Keeps Shutting and Reopening Endlessly.

The batteries should be checked first when this happens because low batteries could result in improper operation of the lock.

If you discover that they are low, get a new pair.

You should also make sure that the bolts are stretched all the way. Remove any dirt in the path of the lock.

Another item you should verify is the placement of the Tru-bolt smart locks.

For it to be properly aligned the bolt must be parallel to the door strike. If this is not done the door may still open even when the code is entered incorrectly.

Something else you should do is the Unlock button. The placement of the Unlock option might be the issue.

These can be solved through the following steps.

  • Remove the Lock door’s inner assembly.
  • Check that the Unlock button (a button with the letters “L R” on it) is well positioned. Doors can be either left- or right-handed. Select “L” if it is left-handed and “R” if it is right-handed.
  • The doorknob placed on the left- place the hand twist horizontally. 
  • The doorknob placed on the right- place the twist vertically 
  • If all these are set correctly, install the inner assembly
  • Verify how effectively the lock is working.

Continuous Lock Alarm

Reasons Your Lock Alarm Goes Off
  • The lock has broken down
  • Wrong commands
  • Poor battery performance
What To Do
  • Replace aged batteries
  • Correct the wrong insertion of batteries

If the beeping continues, seek assistance from an experienced locksmith.

Thoroughly inspect the batteries regarding levels of voltage left and placement. Dead ones call for a replacement.

Simultaneous beeping and flashing have been recorded with Tru Bolt smart locks. These are different types of beeping and flashing and what they indicate.

Color of light/flash Beep duration and number Interpretation/ Action required
Green A long beep No issue with the lock
Red two Crashed program
Red Seven in rapid succession for five seconds Change the batteries
Red(Four) Four Critical battery status
Red(Four) Double Incorrect code keyed in several times
Red(Three) Three Scan for errors
Red(Six) Two brief beeps (Three times) Made a mistake after an error with the lock
Green Lengthy beep then a short one Powered lock

Tru Bolt smart locks: different types of beeping and flashing and what they indicate

The Tru Bolt electronic lock’s keypad has stopped working

If this happens this is what you should do.

  • You need to examine the batteries to see if they are depleted or running low. Replace them with a new pair.
  • Ensure that they are also properly fixed and that the contacts of the batteries are not corroded.
  • You might have entered many incorrect attempts and the keypad is locked up. If this is the case wait for 60 seconds and try again.

A Rusty System

Confirm the positioning of the plates and the latches. Ensure no objects are stuck in the keyhole. Spray or apply lubricant into the keyhole.

Once it has been sprayed, insert the key to allow the lubricant to enter the locking mechanism.

FAQs

How to Erase All Changes Made on Settings?

Please contact a locksmith if the situation persists and you cannot resolve it.

-With a ten-second time allowance, remove and then remount the batteries.
-After installing the battery, you should listen for a prolonged beep.
-Now, within a 3-second time frame, push the “Unlock” button three times.
-Green flash to indicate a successful reset.

How to Go About System Reset Without the Original Code?

-Enter the factory and tap on “Unlock”. By default, you’ll use the number 123456.
-To proceed, please press the “4” button.
-Choose the “Unlock” option and hit the button.
 -Click “Unlock.” with the newly acquired 6-digit number
-Select “Unlock”.
-If the modification is effective, a green light will blink.

Is WD40 Safe?

There are better lubricants and this is generally not recommended.

Will My Key Work if Batteries Are Not Functional?

Yes, your key still opens if the batteries are not functional.

What Is the Code for Factory Reset?

Use 123456 to reset all settings.

Why Is My Tru Bolt Blinking Red?

-A combination of two beeps and red flashes: Programme failure
-Seven beeps combined with red light for five seconds: Battery needs replacement
-Four short beeps with four red flashes: Your battery is almost completely depleted.

Final Thoughts

Do not panic because of Tru-Bolt malfunctions. They are frequently reported and their causes are vast. 

If you come across such a lock, the first thing you should do is check its physical condition and make sure everything is where it should be.

If none of the tips above work, then don’t hesitate to reach out to a locksmith for an unremitting malfunction.

Jane Harmon

Jane is a tech enthusiast and a dedicated home improvement buff. Her passion for transforming spaces and integrating smart technologies into daily life makes her articles a delightful and informative read. With a background in interior design and a flair for DIY projects, Jane offers hands-on advice and creative tips for every home enthusiast. Her writings focus on the integration of home appliances & electronics, smart homes, and DIY home maintenance & improvement. In her spare time, Jane loves to garden and is always on the hunt for the next innovative gadget to elevate her home.

Similar Posts

Tru Bolt Electronic Lock Troubleshooting: A Complete Guide

Tru-Bolt Electronic Locks are popular because they are easy to install and program. But troubleshooting the Tru Bolt electronic lock is a common problem that many people face. If your Tru Bolt door lock is not working properly, it can cause serious problems. You will need to find out the cause of the problem.

This article will tell you about some common issues and how to fix common Tru Bolt lock issues.

General Tru Bolt Electronic Lock Problems and Troubleshooting

Tru Bolt Electronic Lock Keypad does not work.

If the lock keypad is not responding, it could be due to several reasons:

  • The batteries might just be dead. Replace with four high quality alkaline batteries.
  • Make sure the batteries are installed correctly; if they still do not work after installing new ones, you may need to completely replace the lock.
  • Dirt has accumulated on them and caused a short circuit. ; try wiping both sides with a damp cloth while turning off the power at the switch box before calling us so we can help diagnose further problems.
  • The keypad may be locked due to an incorrect code . Now please wait 60 seconds;

Please note that ShineACS Locks is just writing a troubleshooting article for the Tru Bolt electronic lock and providing possible reversal suggestions, not offering after-sales service. . If you cannot finally solve your problem with the content of our article, please contact the official aftermarket.

But if you want to change your home’s door lock, please check out our TTlock smart lock to help you control your door more safely and conveniently with your phone.

Tru bolt lock continues to beep.

If the lock beeps and you can’t stop it, there are a few things you can try.

  • Check battery . If the battery is dead, replace it with a new one.
  • Make sure all parts are installed correctly.
  • Check the keyboard for dirt or debris. In this case, use a soft cloth or cotton swab dipped in rubbing alcohol to thoroughly wipe the edges of the outer cover and the inside of the keyboard.
  • Check all wires for breaks or chafing .

If none of these options work, contact TRU Customer Service with details of what happened when changing the batteries or any other possible solutions you might have tried before calling us.

Tru-Bolt keypad lock not working.

You may have accidentally locked yourself in your home or office, but all hope is not lost! If your Tru Bolt electronic lock is not working properly, here are some common problems and their respective solutions:

  • Make sure you entered the correct user code . If not, try resetting the lock by holding both buttons on the keyboard for 15 seconds until you hear a double beep. Then enter a new combination – the one that works!
  • Make sure there is enough power in the battery compartment. If you notice that it is empty or discharged, replace it with a new one as soon as possible.
  • Replace any batteries if they are corroded or damaged so they can work correctly and read exactly how much power they contain.
  • Check all wires connecting keypad and lock mechanism. ; if they are worn or broken, they should be replaced immediately to prevent further damage when using this device again!
The Tru Bolt keyboard does not light up.

If your Tru Bolt keyboard does not light up, there are several options:

  • Batteries may or may not be empty and should be replaced. . If so, you should replace the batteries with new ones before testing again.
  • Make sure the batteries are inserted correctly . If this is not a problem, try removing and reinserting them until the indicator lights up.
  • Corrosion may form on the battery contacts inside the lock. on them, preventing the electricity from the batteries from reaching the chip in your electronic lock. If you suspect this, you should clean all surfaces with a dry cloth and alcohol wipes until there are no marks left on them, and then try pressing the buttons again.
Tru Bolt Inner Handle Won’t Turn:

If you tighten the Tru bolt, the electronic lock’s inner handle won’t turn, mostly because the lock handle or vertical shank is not set correctly. Now please remove the inner assembly and move the inner handle. When the latch latch is retracted, make sure the shank is in a vertical position.

If this still does not work, the problem may be with the lock cylinder or latch assembly.

Check these components for damage before replacing; if they are damaged beyond repair, please take photos so you can show us exactly what is wrong should we need to send a technician as part of our warranty process.

Latch sticking:

If the bolt latch of an electronic true-bolt lock is sticking, this can happen when the lock set screws may be too tight and loose. Now try the following solutions:

  • Remove the inner assembly.
  • Slightly loosen the mounting plate screws.
  • Locking and unlocking with a key.
  • Reconnect the control wire and inner assembly.

Also, if you do not keep the keyboard clean (especially after using cleaning products) or if there is debris between the keyboard and its case.

The lock will not work electronically.

If the Tru Bolt electronic lock does not work electronically, you may need to check the following:

  • Make sure all batteries are fresh, good quality alkaline batteries.
  • Check the correct polarity (+-) of all batteries.
  • Check that the control wire is attached to the inner assembly and not damaged.
  • Check each wire for loose or disconnected wires.
  • Disconnect the wiring harness and reconnect the wiring harness.

If you have replaced the battery and it still does not work, your lock has an electrical problem and you need to call a professional locksmith to repair it.

The lock signals an error when opening or locking, and the bolt latch will not fully extend or retract when the door is closed.

If this happens, try to solve the problem by doing the following:

  • Open the door with the key or inside handle. While the door is open, make sure the bolt latch operates smoothly.
  • Check striker alignment; adjust if necessary to ensure that the latch of the deadbolt does not bind.
  • Make sure the shank is vertical and straight up and down.
The keypad beeps and the LED flashes.

If your keypad beeps and the wire flashes, replace the old batteries with four new high quality alkaline batteries.

Tru Bolt electronic lock beeps and lights up.

You may be having problems with your Tru Bolt electronic lock if it beeps, flashes, or shows different numbers. Below is a list of common problems and how to determine the cause:

  • One long beep and LED turns green: unlock/valid programming:
  • Two short beeps and LED lights up red: Blocking
  • Two short beeps and LED flashes red twice: Incorrect programming
  • Short beeps and red LED flashes seven times: Low voltage
  • Four short beeps and four red LED flashes: Extra low voltage
  • Three long beeps LED flashes red three times: Lockout error
  • Two short beeps three times LED flashes red six times: repeat operation after blocking
  • At each attempt, two short beeps and a red LED: 4 attempts to enter the wrong code.
  • One long beep and one short beep, LED solid green: Power on.
  • One long beep and one short beep and the LED turns green (may happen several times or occasionally): Chip reset

If none of these steps work, the problem is likely with your lock’s wiring or electrical components. You may need to contact an electrician or a plumber who can perform further diagnostics on your system.

Turbo Bolt Customer Service

If you are having issues with your lock or need help setting up the app, here are a few resources to contact Tru Bolt Customer Service:

  • Phone: 888-232-3574
  • Email address [email protected] (this is not a live chat feature)
  • Tru Bolt website: https://www.truboltlocks.info/. The website offers more information about their product line, company history, and a contact page to submit feedback on your experience using their products or services.
  • Tru Bolt Youtube channel: https://www.youtube.com/channel/UCgLunUHxOVQhvoZp3xkesjA/featured

Tru Bolts electronic lock instruction manual.

If you want to learn more about programming, installing and troubleshooting Tru Bolt electronic locks, you can download and check the following electronic lock instruction manual for reference.

  • Tru Bolt Classic Digital Deadbolt User Manual with Keyboard
  • Tru Bolt Classic Digital Deadbolt Touchscreen User Manual
  • Tru Bolt classic digital pen with keyboard. User guide.
  • Tru Bolt Classic Digital Lever with Keypad User Manual
  • Tru Bolt Gemini Biometric Enabled Deadbolt with Keyboard User Manual
  • Tru Bolt Infinity Bluetooth Deadbolt User Manual with
  • Keyboard

  • Tru Bolt Orion Wi-Fi Bolt with Keyboard User Manual

1
Tru Bolt Electronic Lock Troubleshooting: The Complete Guide

Tru Bolt 9 Electronic Lock Troubleshooting FAQ0007

Conclusion

So now you know how to troubleshoot your electronic lock. If your problem is not one of those described here, it may be best to contact the manufacturer. They may be able to help you by phone or email. You can also try contacting ShineACS Locks.

Smart Keypad Lock Troubleshooting:

  • Hornbill Smart Lock Troubleshooting
  • Troubleshooting SimpliSafe 9 smart lock0018
  • Troubleshooting Smonet Door Lock
  • Defiant lock troubleshooting
  • ADT Door Lock Troubleshooting
  • Honeywell Electronic Door Lock Troubleshooting
  • Milox Troubleshooting
  • Sifely smart lock troubleshooting
  • Local troubleshooting
  • Vivint Door Lock Troubleshooting
  • Alfred Lok Troubleshooting
  • Troubleshooting Signstek Door Lock
  • Wyze lock troubleshooting
  • Samsung Door Lock Problems and Troubleshooting
  • Troubleshooting blocking August

Other Recommended Home Smart Lock Articles

Details Kwikset Smart Key Issues and Troubleshooting Guide

Details

https://www. acslocks.com/wp-content/uploads/2023/05/Details-Kwikset-Smart-Key-Problems-and-Troubleshooting-Guide.png
555
959
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-05-30 22:12:052023-05-23 17:58:25Kwikset Smart Key Details Problems and Troubleshooting Guide

What is a deadbolt lock and what are the types of deadbolt locks?

Read more

https://www.acslocks.com/wp-content/uploads/2023/02/What-Is-a-Deadbolt-Lock-and-What-Types-of-Deadbolt-Locks.jpg
450
800
Vincent Zhu
https://www.acslocks.com/wp-content/uploads/2021/12/1640937985-ShineACS-Locks4.png
Vincent Zhu2023-02-03 20:52:092023-05-25 15:50:16What is a deadbolt lock and what are the types of deadbolt locks?

Brinks Digital Deadbolt Troubleshooting and Programming Guide

Read More

https://www.